Study of Friction Stir Welding Parameters Affecting the Microstructure and Mechanical Properties of Silicon Carbide Reinforced Aluminum 6061

Article Sidebar

PDF
Published: Aug 22, 2025
Keywords:
Friction Stir Welding Aluminium Aluminium Composite Silicon Carbide Particle

Main Article Content

Supparerk Boontein
Department of Production Engineering, Faculty of Engineering, King Mongkut’s University of Technology Thonburi
Kongkiat Puparattanapong
Department of Production Engineering, Faculty of Engineering, King Mongkut’s University of Technology Thonburi
Ghit Laungsopapun
Thailand Institute of Scientific and Technological Research
Wattanachai Prukkanon
Automotive Innovation Engineering, School of Engineering, University of the Thai Chamber of Commerce

Abstract

The objective of this study is to investigate the effects of parameters on the metallurgical and mechanical properties of friction stir welding of aluminum AA6061 reinforced with Silicon Carbide micro-particles of 5 microns. A study on the effect of silicon particle addition in friction stir welding using a pinless tool in the first pass showed better silicon carbide dispersion in the welding zone compared to using a square pin tool. A study on the effect of transverse speed 26, 34, and 50 mm/min and rotational speed 920,1,040, and 1,350 rpm on the top welds appearance showed complete welds at all transverse speed which exhibited cracks along the weld line and the lowest hardness value of 54.21 HV. As for the microstructure, uniform silicon carbide particle distribution was observed at a travel speed of 26 mm/min and a welding rotation speed of 1350 round per minute (rpm). This resulted silicon carbide partical dispersed in a homogeneous with aluminum matrix and obtain the highest hardness of 77.16 HV.

Article Details

Issue
Vol. 8 No. 1 (2025): Royal Thai Naval Academy Journal of Science and Technology (January - December 2025)
Section
Research Ariticles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The author has the sole responsibility for the material published in RTNA Journal of Science and Technology, which the editorial board may not agree on that material.
RTNA Journal of Science and Technology owns the copyright of the text, the illustration, or other material published in the journal. No parts or the whole of the material published may be disseminated or used in any form without first obtaining written permission from the academy.

References

Materia TT. Marine applications of aluminum alloys [Internet]. 2025 [cited 2025 Mar 3]. Available from: https://www.totalmateria.com/en-us/articles/marine-applications-of-aluminum-alloys-1/.

Morris PL, Baker C. Properties and applications of particulate reinforced aluminum MMC. In: Bouchard M, Tremblay P, editors. Production, refining, fabrication and recycling of light metals. Oxford: Pergamon; 1990. p. 199-209.

Pk J, et al. The effect of SiC content in aluminum-based metal matrix composites on the microstructure and mechanical properties of welded joints. J Mater Res Technol. 2021;12:2325-2339.

Aluminum Association Standards (A.A.S). Aluminum 6061-T6; 6061-T651 [Internet]. 2025 [cited 2025 Mar 1]. Available from: https://asm.matweb.com/search/specificmaterial.asp? bassnum=ma6061t6.

Skilled Investments in Aluminum (S.I.i). Advantages of friction stir welding (FSW) | SBB [Internet]. 2023 [cited 2023 Feb 22]. Available from: https://sbb.ca/home/servicessbb/fsw/.

Elsayed M, Shash A, Abd-Rabou M, El-Sherbiny M. Welding and processing of metallic materials by using friction stir technique: A review. J Adv Joining Process. 2021;3:1-20. doi: 10.1016/j.jajp.2021.100059.

Bodaghi M, Dehghani K. Friction stir welding of AA5052: the effects of SiC nano-particles addition. Int J Adv Manuf Technol. 2017;88:2651-2660. doi: 10.1007/s00170-016-8959-8.

Kumar D, Ottarackal D, Acharya U, Medhi T, Saha Roy B. A parametric study of friction stir welded AA6061/SiC AMC and its effect on microstructure and mechanical properties. Mater Today Proc. 2020. doi: 10.1016/j.matpr.2020.02.

Takhakh AM, Abdulla HH. Surface modification of AA 7075-T651 plate using friction stir processing with SiC particles. Emirates J Eng Res. 2017;22(3):1-11.

Mahmoud ERI, Takahashi M, Shibayanagi T, Ikeuchi K. Effect of friction stir processing tool probe on fabrication of SiC particle reinforced composite on aluminium surface. Sci Technol Weld Join. 2009;14(5):413-425. doi: 10.1179/136217109X406974.

Rathee S, Maheshwari S, Siddiquee A, Srivastava M. Investigating effects of groove dimensions on microstructure and mechanical properties of AA6063/SiC surface composites produced by friction stir processing. Trans Indian Inst Met. 2017. doi: 10.1007/s12666-017-1060-7.

Zhou W, Xu ZM. Casting of SiC reinforced metal matrix composites. J Mater Process Technol. 1997;63(1–3):358-363. doi: 10.1016/S0924-0136(96)02647-7. Available from: https://www.sciencedirect.com/science/article/pii/S0924013696026477.

Hashim J, Looney L, Hashmi MSJ. Metal matrix composites: Production by the stir casting method. J Mater Process Technol. 1999;92-93:1-7. Available from: https://www.scirp.org/

reference/referencespapers?referenceid=642817.

AZoM.com. Silicon carbide (SiC) properties and applications [Internet]. 2001 Feb 5 [cited 2025 Mar 2]. Available from: https://www.azom.com/article.aspx?ArticleID=42.

Otai Special Steel. D2 tool steel | 1.2379 | X153CrMo12 | SKD11 [Internet]. 1999-2024 [cited 2025 Mar 2]. Available from: https://www.astmsteel.com/product/d2-tool-steel-1-2379-x153crmo12-skd11/.

Fine Cause Co., Ltd. SKD11 steel characters and heat treatment [Internet]. 2025 [cited 2025 Mar 3]. Available from: https://www.finecause.com/knowledge/knowledge-7-1.

Alhelli A, Al Hamaoy A, Takhakh A. Effect of friction stir processing parameters on the properties of AA7075-T73/Al2O3 surface metal matrix composite. Mater Sci Forum. 2020;1002:140-150. doi: 10.4028/www.scientific.net/MSF.1002.140.