Preparation of manuscript

Manuscripts submitted to JRAME must be written in English and should be formatted in the same form and style as that of the final journal article. 

The title should contain the article title, authors' names and affiliations and the address for manuscript correspondence (including e-mail address, telephone and fax numbers).  For each author, a numbered superscript should be used to indicate institution affiliation.  The corresponding author should be indicated by the asterisk “ ” symbol and the presenting author should be identified by name underlining.  The corresponding author’s telephone/fax numbers and e-mail address should be provided as the final item in the title block.   Following the title is a single paragraph abstract summarizing the main findings of the manuscript in less than 150 words.  After the abstract a list of up to 6 keywords that will be useful for indexing or searching should be included.  The main body of the manuscript should start right after the keywords.  Experimental procedure, data and computational methods must be explained in sufficient detail to permit replication by other researchers. 

The main body of manuscript can be divided into sections and (optionally) sub-sections with sub-subsections.  

The size of the manuscript must be custom (19 cm x 26 cm) and it should be typed in single paragraph with single spacings and the following margins.

                Top margin                                           1.7 cm

                Bottom margin                                    1.5 cm

                Left margin                                           1.3 cm

                Right margin                                        1.3 cm


Figures and Tables

All figures and tables should be placed after their first mention in the text.  Place figure captions below the figures and centered within a column.  Place table titles above the tables and flush left.  If figure has two parts, include labels “(a)” and “(b)” as part of the artwork. Please verify that the figures and tables mentioned in the text actually exist.  When citing a figure(s) in the text, they should be referred as, for example, “Fig. 1” or “Figs. 1-3.” or Table. 1.  Do not abbreviate “Table”.  Figures should be numbered consecutively with Arabic numerals. Lettering on drawings should be professional quality or generated by high-resolution computer graphics.  Illustrations in color can be accepted only if the authors defray the cost.  TIF or EPS files are required for figures.



Equations should be placed about left and numbered consecutively.   Equation numbers should be Arabic numerals enclosed in parentheses on the right-hand margin.  They should be cited in the text as, for example, “Eq. (1)” or “Eqs. (1) – (3)”.  Be sure that the symbols in equations are defined before the equation appears or immediately followings.  The font and size of symbols should be consistent throughout the manuscript.



Acknowledgements may be made to individuals or institutes who have made an important contribution.



The relevant works must be cited and listed as references at the end of the manuscript, in order of citation.  They should be chronologically referred in the text by Arabic numerals enclosed in square brackets, e.g. [1], [1, 2], [1-3].  The reference list should be set in the same type face as the body of the text.   Some example of the references to journals, proceedings, technical reports, books and web-based articles are illustrated as follows: 


Article in Journals

[1] Kar, A. and Kanoria, M. Generalized thermo-visco-elastic problem of a spherical shell with three-phase-lag effect, Applied Mathematical Modelling, Vol. 33(8), 2009, pp. 3287-3298.

[2] Waszkiewics, S.D., Tierney, M.J. and Scott, H.S. Development of coated, annular fins for adsorption chillers, Applied Thermal Engineering, Vol. 29(11-12), 2009, pp. 2222-2227.



[1]  Kato, S. and Widiyanto, A. Environmental Impact Assessment of Various Power Generation Systems, paper presented in the Tri-University International Joint Seminar & Symposium 2001, Chiang Mai, Thailand.

[2] Jungmeier, G. LCA for Comparison of Greenhouse Emission of Bioenergy and Fossil Energy System, paper presented in the 8thMeeting of COST E9-Working Group 3, 2001, Montpellier, France.



[1] Craglia, M. and Annoni, A. The Spatial Impact of European Union Policies, EUR 20121 EN, Ispra: European Communities, 2003.

[2] Division of Technical Services and Planning, Chiang Mai City Municipality. Annual Report, 2003.



[1] Myers, R.H. and Montgomery, D.C. Response Surface Methodology: Process and product optimization using designed experiments, 1995, John Wiley & Sons, New York.

[2] Goswami, Y.D., Kreith, F. and Kreider, J.F. Principles of Solar Engineering, 2nd edition, ISBN: 1-56032-714-6, 1999, Taylor & Francis, Philadelphia.


Web-based articles

[1] Department of Alternative Energy Development and Efficiency, Ministry of Energy, Thailand. Statistic Data, URL:, accessed on 24/04/2010,2004.

[2] Spath, P.L. and Mann, M.K. Life Cycle Assessment of a Natural Gas Combined-Cycle Power Generation System, NREL/TP-570-27715, National Renewable Energy Laboratory, Colorado, USA, URL:, accessed on 24/04/2010, 2002.


Suggest Potential Reviewers

The authors must suggest at least 3 potential reviewers to review their submitted paper. Only one reviewer from their countries is allowed. Those reviewers should not be, in one way or another, related to some of the authors. The reviewers list can be separated into another file.

Suggest Potential Reviewers file


Submission of manuscript

Files should be saved as Word (.doc or .docx) before uploading, to ensure the equations translate properly.  Manuscripts and enquiries should be submitted via

Manuscripts are accepted for review with the understanding that the same work has not been and will not be submitted elsewhere, and that its submission for publication has been approved by all of the authors and by the institution where the work was carried out. Any person cited as a source of personal communications must approve such citation.

All manuscripts submitted to JRAME undergo peer-review process via double-blind review.