Advancements in Fused Deposition Modeling: Materials, Processes, and Emerging Trends in Polymer Additive Manufacturing
Article Sidebar
Main Article Content
Abstract
Fused Deposition Modeling (FDM) has become a leading technology in polymer additive manufacturing due to its versatility, cost effectiveness, and accessibility. This review explores the current advancements, material innovations, and emerging trends within FDM, particularly focusing on high performance polymers and composite materials. Key materials like PEEK (Polyetheretherketone), PEI (Polyetherimide), and PPSU (Polyphenylsulfone) are discussed in terms of their mechanical, thermal, and chemical properties, as well as their applications across industries such as aerospace, automotive, and medical devices. The incorporation of fiber and particle reinforced composites has significantly enhanced FDM capabilities, offering improved strength, rigidity, and thermal resistance for demanding applications. Moreover, the integration of Artificial Intelligence (AI) and the Internet of Things (IoT) is poised to revolutionize the FDM process by enabling predictive maintenance, and real time monitoring. However, challenges such as printability, cost, and material limitations continue to hinder broader adoption, especially for high performance composites and advanced materials. The review concludes by highlighting areas for future research, and material development, which are essential for unlocking the full potential of FDM in both prototyping and end use production.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
Ramazani H, Kami A. Metal fused deposition modeling, a new extrusion based additive manufacturing technology for manufacturing of metallic parts: a review. Progress in Additive Manufacturing. 2022;7(4):609–626.
Chaudhari M, Jogi BF, Pawade RS. Comparative study of part characteristics built using additive manufacturing fused deposition modeling. Procedia Manufacturing. 2018;20:73–78.
Di Angelo L, Di Stefano P, Marzola A. Surface quality prediction in fused deposition modeling additive manufacturing. International Journal of Advanced Manufacturing Technology. 2017;93:3655–3662.
Gong H, Snelling D, Kardel K, Carrano A. Comparison of stainless steel 316L parts made by fused deposition modeling and selective laser melting based additive manufacturing processes. JOM Journal of the Minerals Metals and Materials Society. 2019;71:880–885.
Palanisamy C, Raman R, Dhanraj PK. Additive manufacturing: a review on mechanical properties of polyjet and fused deposition modeling printed parts. Polymer Bulletin. 2022;79(9):7065–7116.
Di Angelo L, Di Stefano P, Dolatnezhadsomarin A, Guardiani E, Khorram E. A reliable build orientation optimization method in additive manufacturing: the application to fused deposition modeling technology. International Journal of Advanced Manufacturing Technology. 2020;108:263–276.
Mishra V, Negi S, Kar S. Fused deposition modeling based additive manufacturing of recycled thermoplastics and associated composites. Journal of Material Cycles and Waste Management. 2023;25(2):758–784.
Rahman H, John TD, Sivadasan M, Singh NK. Investigation on the scale factor applicable to ABS based fused deposition modeling additive manufacturing. Materials Today Proceedings. 2018;5(1):1640–1648.
Al Ghamdi KA. Sustainable fused deposition modeling additive manufacturing of ABS components with emphasis on energy minimized and time efficient lightweight construction. International Journal of Lightweight Materials and Manufacturing. 2019;2(4):338–345.
Albu SC. Development on the production of a new type of extruder used in additive manufacturing fused deposition modeling technology. Procedia Manufacturing. 2018;22:141–146.
Fountas NA, Kechagias JD, Manolakos DE, Vaxevanidis NM. Single and multi objective optimization of fused deposition modeling based additive manufacturing using metaheuristic algorithms. Procedia Manufacturing. 2020;51:740–747.
Haleem A, Javaid M. Polyether ether ketone and its manufacturing of customised three dimensional printed dentistry parts using additive manufacturing. Clinical Epidemiology and Global Health. 2019;7(4):654–660.
Vaezi M, Yang S. Extrusion based additive manufacturing of polyether ether ketone for biomedical applications. Virtual and Physical Prototyping. 2015;10(3):123–135.
McCrickard C, Ullah J, Boyd A, Archer E, Manzoor F. Polyether ether ketone and polyetherimide blends for three dimensional printed medical devices. Polymer Processing 2024 PPS2024. 2024.
Francis JN, Banerjee I, Chugh A, Singh J. Additive manufacturing of polyetheretherketone and its composites: A review. Polymer Composites. 2022;43(9):5802–5819.
Das A, Chatham CA, Fallon JJ, Zawaski CE, Gilmer EL, Williams CB, et al. Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers. Additive Manufacturing. 2020;34:101218.
Vidakis N, Petousis M, Spiridaki M, Mountakis N, Moutsopoulou A, Kymakis E. Optimization of critical process control parameters in material extrusion additive manufacturing of high performance polyethylenimine: energy expenditure, mechanical expectations, and productivity aspects. International Journal of Advanced Manufacturing Technology. 2024;132(3):1163–1192.
Al Christopher C, da Silva ÍG, Pangilinan KD, Chen Q, Caldona EB, Advincula RC. High performance polymers for oil and gas applications. Reactive and Functional Polymers. 2021;162:104878.
Rashed K, Kafi A, Simons R, Bateman S. Optimization of material extrusion additive manufacturing process parameters for polyether ketone ketone. International Journal of Advanced Manufacturing Technology. 2023;126(3):1067–1091.
Cicala G, Latteri A, Del Curto B, Lo Russo A, Recca G, Farè S. Engineering thermoplastics for additive manufacturing: A critical perspective with experimental evidence to support functional applications. Journal of Applied Biomaterials and Functional Materials. 2017;15(1):10–18.
Kadiyala AK, Hana J, Kaliseti VS, Venkatesan KR, Zekriardehani S, Krishnamurthy A, et al. Influence of carbon nanotubes on printability of high strength polyetherimide based nanocomposites for large area additive manufacturing. SSRN. 2021. Available from: https://ssrn.com/abstract=5159470
Pelin G, Sonmez M, Pelin CE. The use of additive manufacturing techniques in the development of polymeric molds: A review. Polymers. 2024;16(8):1055.
Zawaski C, Williams C. Design of a low cost, high temperature inverted build environment to enable desktop scale additive manufacturing of performance polymers. Additive Manufacturing. 2020;33:101111.
Prabhu R, Devaraju A. Recent review of tribology, rheology of biodegradable and fused deposition modeling compatible polymers. Materials Today Proceedings. 2021;39:781–788.
Liu P, Kunc V. Effect of three dimensional printing conditions on the micro and macrostructure and properties of high performance thermoplastic composites. Structure and Properties of Additive Manufactured Polymer Components. Woodhead Publishing; 2020:65–86.
Liu P, Kunc V. Effect of three dimensional printing conditions on the micro and macrostructure and properties of high performance thermoplastic composites. Structure and Properties of Additive Manufactured Polymer Components. Woodhead Publishing; 2020:65–86.
Abbott A, Gibson T, Tandon GP, Hu L, Avakian R, Baur J, et al. Melt extrusion and additive manufacturing of a thermosetting polyimide. Additive Manufacturing. 2021;37:101636.
Velu R, Vaheed N, Ramachandran MK, Raspall F. Experimental investigation of robotic three dimensional printing of high performance thermoplastics polyether ether ketone: a critical perspective to support automated fibre placement process. International Journal of Advanced Manufacturing Technology. 2020;108:1007–1025.
Garcia FB, Jimenez LR, Puerta APV, Vidal SRF. Polymeric additive manufacturing in the aeronautical industry. Modern Manufacturing Processes for Aircraft Materials. Elsevier; 2024:3–28.
Strano M, Rane K, Farid MA, Mussi V, Zaragoza V, Monno M. Extrusion based additive manufacturing of forming and molding tools. International Journal of Advanced Manufacturing Technology. 2021;117(7):2059–2071.
Vicente CM, Sardinha M, Reis L, Ribeiro A, Leite M. Large format additive manufacturing of polymer extrusion based deposition systems: review and applications. Progress in Additive Manufacturing. 2023;8(6):1257–1280.
Kim HC, Tu R, Sodano HA. Room temperature three dimensional printing of high temperature engineering polymer and its nanocomposites with porosity control for multifunctional structures. Composites Part B Engineering. 2024;279:111444.
Siemiński P. Introduction to fused deposition modeling. Additive Manufacturing. Elsevier; 2021:217–275.
Efa DA, Ifa DA. Optimization of design parameters and three dimensional printing orientation to enhance the efficiency of topology optimized components in additive manufacturing. Results in Materials. 2025;26:100702.
Doshi M, Mahale A, Singh SK, Deshmukh S. Printing parameters and materials affecting mechanical properties of fused deposition modeling three dimensional printed parts: perspective and prospects. Materials Today Proceedings. 2022;50:2269–2275.
Giri J, Shahane P, Jachak S, Chadge R, Giri P. Optimization of fused deposition modeling process parameters for dual extruder three dimensional printer using artificial neural network. Materials Today Proceedings. 2021;43:3242–3249.
Borah J, Chandrasekaran M. Development of artificial neural network model for predicting mechanical properties of three dimensional printed polyether ether ketone polymer using fused deposition modeling and optimization of process parameters for better mechanical properties. Physica Scripta. 2024;99(11):116005.
Kakade S, Mulay A, Patil S. Internet of things based real time online monitoring system for open ware fused deposition modeling printers. Materials Today Proceedings. 2022;67:363–367.
