การออกแบบและพัฒนาอากาศยานไร้คนขับแบบปีกตรึงขึ้น-ลง ทางดิ่งขนาดเล็ก
คำสำคัญ:
Unmanned Aerial Vehicle, Vertical Take-off and Landing, Airfoilบทคัดย่อ
This paper present a design and development of a fixed-wing vertical take-off and landing unmanned aerial vehicle. Aircraft structure is designed based on tilt-rotor by using tree rotors system. Analyzed five airfoils using the XFLR5 program including S1223, E397, NACA-2411, FX-63137sm and Clark Y. The FX-63137sm is the best results for the wings and select the NACA-2411 for the empennage. Design a stabilize mechanism about the pitch axis using the servo-motor connected in a four-bar Linkage configuration. A stabilize mechanism for roll axis to cancel unbalance torque using four-bar linkage too. Finally, the propeller system is tested for thrust characteristic by the relationship between the control signal from the radio controller in the percentage of throttle and the trust from the motor-propeller system necessary for design an automatic flight controller. The relationship is linear, with a maximum power of 1,700 g when the throttle is in the maximum power position.
Downloads
เผยแพร่แล้ว
ฉบับ
บท
License
ลิขสิทธิ์
บทความที่ได้รับการตีพิมพ์ในวิศวกรรมสารเกษมบัณฑิต ถือเป็นกรรมสิทธิ์ของมหาวิทยาลัยเกษมบัณฑิต ห้ามนำข้อความทั้งหมดไปตีพิมพ์ซ้ำ ยกเว้นได้รับอนุญาตจากมหาวิทยาลัยเกษมบัณฑิตแล้ว
ความรับผิดชอบ
หากบทความที่ได้รับการตีพิมพ์นั้นเป็นบทความที่ละเมิดลิขสิทธิ์ของผู้อื่นหรือมีความไม่ถูกต้องในเนื้อหาของบทความ ผู้เขียนบทความนั้นต้องเป็นผู้รับผิดชอบ