การศึกษาพฤติกรรมการรับน้ำหนักของสะพานช่วงเดี่ยวแบบรองรับธรรมดาเนื่องจากน้ำหนักรถบรรทุกไทย
Keywords:
รถบรรทุกไทย, AASHTO, สัดส่วนแรงเฉือน, สัดส่วนโมเม้นต์ดัด, Thai Truck, Shear Ratio, Moment RatioAbstract
A STUDY ON LOAD-CARRYING BEHAVIOR OF SIMPLE-SUPPORTED BRIDGE DUE TO THAI TRUCK LOADS
Highway Department has rated Thai truck weights which are different from the highway live loadings specified by the American Association of State Highway and Transportation Officials (AASHTO) standard specifications, which are popularly used in Thailand. This article has studied the load-carrying behavior of simple-supported bridge with the length ranging from 5-60 meters due to Thai truck loads and the AASHTO loads. This study aims to compare the maximum shear and bending moment of the simple beam bridges. The appropriate ratios of the shear, also bending moment, between Thai truck loads and AASHTO loads are proposed. The results show that, in each span, the maximum shear and bending moment caused by different types of trucks. In addition, the largest trucks produce the maximum responses for some analysis cases. From the structural analysis, the shear ratios and the moment ratios are proposed associated with various bridge span length. For bridge design practice in Thailand, these ratios could be applied as multiplier to the AASHTO loads, therefore, the maximum shear and bending moment of simple beam bridge caused by the proportioned AASHTO loads and Thai truck loads are comparable.
Downloads
Issue
Section
License
*Copyright
The article has been published in Kasem Bundit Engineering Journal (KBEJ) is the copyright of the Kasem Bundit University. Do not bring all of the messages or republished except permission from the university.
* Responsibility
If the article is published as an article that infringes the copyright or has the wrong content the author of article must be responsible.