Thermal performance of integrated collector storage solar water heater with mixed asphalt absorber plate
Keywords:
Integrated collector storage solar water heater, Mixed asphalt, Storage tank, Absorber plate, Thermal performance, EfficiencyAbstract
This paper presents an integrated collector storage solar water heater with a mixed asphalt absorber plate. It consists of a clear glass cover, an absorber plate made from mixed asphalt, storage tank and insulations. The storage tank contains 100 L of water and 1 m 2 of absorbed area. The measured data showed the maximum mixed asphalt temperature and maximum water temperature in the storage tank are 67°C and 63°C, respectively. The maximum and minimum hourly efficiencies are 62% and 20%, respectively. Additionally, the mean daily efficiency is 43.5%. The result showed that the mixed asphalt absorber plate is effective to provide thermal performance of integrated collector storage solar water heater with mixed asphalt absorber plate.
References
S. Phiraphat, R. Prommas and W. Puangsombut, “Experimen-tal study of natural convection in PV roof solar collector,” International Communications in Heat and Mass Transfer, Vol. 89,pp. 31-38, December 2017.
T. Cheewanantachai and W. Puangsombut, “Solar sauna room,” E-Nett 2552, National Conference, Nakhon Pathom, 2552, (SE04).
S. Phiraphat, “Enhancement of photovoltaic performance by air circulation channel”, Ph.D. Thesis (Sustainable Energy and Environment), Rajamangala University of Technology Rattanakosin, Nakhon Pathom, TH, 2017.
N. Vatcharasatien, J. Hirunlabh, J. Khedari and M. Daguenet, “Design and analysis of solar thermoelectric power genera-tion system,” International Journal of Sustainable Energy, Vol.24, No.3, 2005, pp. 115-127.
J. A. Duffie and W. A. Beckman, Solar Engineering of Thermal Process, A Wiley-Interscience Publication, New York, 1980.
https://www.researchgate.net/publication/344239288_SWH-RT, 2558
J. Pukdum, T. Phengpom and K. Sudasna, “Thermal performan-ce of mixed asphalt solar water heater,” International Journal of Renewable Energy Research, Vol. 9, no. 2, pp. 712-720, June 2019.
J. Pukdum, K. Sudasna and T. Phengpom, “Experimental study on heat gain reduction and economic evaluation of mixed asphalt solar water heater,” Journal of Engineering an Applied Science, Vol. 15, no. 1, pp. 327-334, 2020.
M. Smyth, P. C. Eames and B. Norton, “Integrated collector storage solar water heaters,” Renewable & Sustainable Energy Reviews, Vol. 10, no. 6, pp. 503-538, December 2006.
R. Kumar and M. A. Rosen, “Thermal performance of integrated collector storage solar water heater with corrugrated absorber surface,” Applied Thermal Engineering, Vol. 30, no. 13, pp. 1764-1768, September 2010.
T. A. Yassen, N. D. Mokhlif and M. A. Eleiwi, “Performance investigation of an integrated solar water heater with corrugated absorber surface for domestic use,” Renewable Energy, Vol.138, pp. 852-860, August 2019.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Faculty of Industrial Technology, Suan Sunandha Rajabhat University
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
บทความที่ได้รับการตีพิมพ์เป็นลิขสิทธิ์ของคณะเทคโนโลยีอุตสาหกรรม มหาวิทยาลัยราชภัฎสวนสุนันทา
ข้อความที่ปรากฏในบทความแต่ละเรื่องในวารสารวิชาการเล่มนี้เป็นความคิดเห็นส่วนตัวของผู้เขียนแต่ละท่านไม่เกี่ยวข้องกับมหาวิทยาลัยราชภัฎสวนสุนันทา และคณาจารย์ท่านอื่นๆในมหาวิทยาลัยฯ แต่อย่างใด ความรับผิดชอบองค์ประกอบทั้งหมดของบทความแต่ละเรื่องเป็นของผู้เขียนแต่ละท่าน หากมีความผิดพลาดใดๆ ผู้เขียนแต่ละท่านจะรับผิดชอบบทความของตนเองแต่ผู้เดียว
