สมรรถนะเชิงความร้อนของเครื่องทำน้ำร้อนพลังงานแสงอาทิตย์แบบบูรณาการตัวรับรังสีอาทิตย์และถังสะสมความร้อนเข้าด้วยกันโดยใช้ยางมะตอยผสมสำเร็จเป็นตัวดูดกลืนรังสี

ผู้แต่ง

  • วิทยา พวงสมบัติ ถนนพหลโยธิน ตำบลโกสัมพี อำเภอโกสัมพีนคร จังหวัดกำแพงเพชร
  • ดิษฐา นนธิวรวงศ์ ถนนพหลโยธิน ตำบลโกสัมพี อำเภอโกสัมพีนคร จังหวัดกำแพงเพชร
  • จิระศักดิ์ พุกดำ สาขาวิชาการจัดการทรัพยากรอาคาร คณะสถาปัตยกรรมและการออกแบบ มหาวิทยาลัยเทคโนโลยีราชมงคลรัตนสินทร์

คำสำคัญ:

เครื่องทำน้ำร้อนพลังงานแสงอาทิตย์แบบบูรณาการตัวรับรังสีอาทิตย์และถังสะสมความร้อนเข้าด้วยกัน, ยางมะตอยผสมสำเร็จ, ถังสะสม, ตัวดูดกลืนรังสี, สมรรถนะเชิงความร้อน, ประสิทธิภาพ

บทคัดย่อ

บทความนี้นำเสนอเครื่องทำน้ำร้อนพลังงานแสงอาทิตย์แบบบูรณาการตัวรับรังสีอาทิตย์และถังสะสมความร้อนเข้าด้วยกันโดยใช้ยางมะตอยผสมสำเร็จเป็นตัวดูดกลืนรังสี เครื่องทำน้ำร้อนพลังงานแสงอาทิตย์แบบบูรณาการฯ ประกอบด้วยแผ่นปิดกระจก ตัวดูดกลืนรังสีที่ทำจากยางมะตอยผสมสำเร็จ ถังสะสมความร้อนและฉนวนกันความร้อน ถังสะสมบรรจุน้ำ 100 L และมีพื้นที่ดูดกลืนรังสี 1 m 2 ข้อมูลที่ได้จากการวัดแสดงอุณหภูมิสูงสุดของยางมะตอยผสมสำเร็จและอุณหภูมิสูงสุดของน้ำในถังสะสมความร้อนอยู่ที่ 67°C และ 63°C ตามลำดับ ประสิทธิภาพเชิงความร้อนรายชั่วโมงมีค่าสูงสุดและต่ำสุดที่ 62% และ 20% ตามลำดับ นอกจากนี้ค่าประสิทธิภาพเชิงความร้อนเฉลี่ยรายวันอยู่ที่ 43.5% จากผลการทดลองแสดงให้เห็นว่ายางมะตอยผสมสำเร็จมีประสิทธิภาพในการเพิ่มสมรรถนะเชิงความร้อนของเครื่องทำน้ำร้อนพลังงานแสงอาทิตย์แบบบูรณาการฯ

เอกสารอ้างอิง

S. Phiraphat, R. Prommas and W. Puangsombut, “Experimen-tal study of natural convection in PV roof solar collector,” International Communications in Heat and Mass Transfer, Vol. 89,pp. 31-38, December 2017.

T. Cheewanantachai and W. Puangsombut, “Solar sauna room,” E-Nett 2552, National Conference, Nakhon Pathom, 2552, (SE04).

S. Phiraphat, “Enhancement of photovoltaic performance by air circulation channel”, Ph.D. Thesis (Sustainable Energy and Environment), Rajamangala University of Technology Rattanakosin, Nakhon Pathom, TH, 2017.

N. Vatcharasatien, J. Hirunlabh, J. Khedari and M. Daguenet, “Design and analysis of solar thermoelectric power genera-tion system,” International Journal of Sustainable Energy, Vol.24, No.3, 2005, pp. 115-127.

J. A. Duffie and W. A. Beckman, Solar Engineering of Thermal Process, A Wiley-Interscience Publication, New York, 1980.

https://www.researchgate.net/publication/326735132_kheruxngthanarxnphlangngansaengxathitybaebchiyangmatxypentawrabrangsixathity, 2556

https://www.researchgate.net/publication/344239288_SWH-RT, 2558

J. Pukdum, T. Phengpom and K. Sudasna, “Thermal performan-ce of mixed asphalt solar water heater,” International Journal of Renewable Energy Research, Vol. 9, no. 2, pp. 712-720, June 2019.

J. Pukdum, K. Sudasna and T. Phengpom, “Experimental study on heat gain reduction and economic evaluation of mixed asphalt solar water heater,” Journal of Engineering an Applied Science, Vol. 15, no. 1, pp. 327-334, 2020.

M. Smyth, P. C. Eames and B. Norton, “Integrated collector storage solar water heaters,” Renewable & Sustainable Energy Reviews, Vol. 10, no. 6, pp. 503-538, December 2006.

R. Kumar and M. A. Rosen, “Thermal performance of integrated collector storage solar water heater with corrugrated absorber surface,” Applied Thermal Engineering, Vol. 30, no. 13, pp. 1764-1768, September 2010.

T. A. Yassen, N. D. Mokhlif and M. A. Eleiwi, “Performance investigation of an integrated solar water heater with corrugated absorber surface for domestic use,” Renewable Energy, Vol.138, pp. 852-860, August 2019.

ดาวน์โหลด

เผยแพร่แล้ว

2025-07-08

รูปแบบการอ้างอิง

พวงสมบัติ ว. . ., นนธิวรวงศ์ ด. ., & พุกดำ จ. . (2025). สมรรถนะเชิงความร้อนของเครื่องทำน้ำร้อนพลังงานแสงอาทิตย์แบบบูรณาการตัวรับรังสีอาทิตย์และถังสะสมความร้อนเข้าด้วยกันโดยใช้ยางมะตอยผสมสำเร็จเป็นตัวดูดกลืนรังสี. วารสารวิชาการเทคโนโลยีอุตสาหกรรม : มหาวิทยาลัยราชภัฏสวนสุนันทา, 8(2), 48–57. สืบค้น จาก https://ph01.tci-thaijo.org/index.php/fit-ssru/article/view/250466

ฉบับ

ประเภทบทความ

บทความวิจัย