การศึกษาพารามิเตอร์ที่เหมาะสมในการหล่อทองเหลือง แบบอินเวสเมนต์ด้วยวิธีการออกแบบการทดลอง

-

ผู้แต่ง

  • Montri Wimol มหาวิทยาลัยราชภัฏพิบูลสงคราม
  • Tanakorn Jantarasricha
  • Siridech Kunhirunbawon

คำสำคัญ:

ทองเหลือง, การหล่อแบบอินเวสเมนต์, การออกแบบการทดลอง

บทคัดย่อ

งานวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาพารามิเตอร์ที่เหมาะสมในการหล่อทองเหลืองแบบ
อินเวสเมนต์ โดยผู้วิจัยใช้วิธีการออกแบบการทดลองทางวิศวกรรม โดยใช้การทดลองเชิงแฟคทอเรียลแบบ 2 ระดับ ซึ่งประกอบด้วย 3 ปัจจัยหลัก ได้แก่ ระยะเวลาอบแบบหล่ออุณหภูมิแบบหล่อและอุณหภูมิเทโลหะหลอมเหลว ผลการศึกษาพบว่าทุกปัจจัยมีผลกระทบต่อชิ้นงานหล่ออย่างมีนัยสำคัญ
ที่ระดับความเชื่อมั่น 95 เปอร์เซนต์ และระดับปัจจัยที่เหมาะสมในการหล่อทองเหลืองแบบอินเวสเมนต์คือ ระยะเวลาในการอบแบบหล่อ 3 ชั่วโมง อุณหภูมิแบบหล่อ 300 องศาเซลเซียส และระดับอุณหภูมิ
ในการเทโลหะ 800 องศาเซลเซียส จากผลการทดลองสามารถนำไปประยุกต์ใช้ในงานอุตสาหกรรม
การหล่อผลิตภัณฑ์เครื่องทองเหลือง

References

Adrian S, Srinath V. Material Properties for Predicting Wax Pattern Dimensions in Investment Casting, Journal of Materials Science and Engineering. 2003; 362: 125-134.

Beeley PR. Foundry Technology. 2nd ed. Oxford: Butterworth-Heinemann, 2001.

Beeley PR, Smart RF. Investment Casting. The University Press Cambridge, 1995.

Choopungartm P. Atlas of Defects in Casting. Bangkok: Metal-Working and Machinery Industries Development Institute, 1990.
Chutima P. Design of Experiment. Bangkok: Chulalongkorn University, 2002.

Jitender K, Amir M Paul X. An intelligent system for predicting hpdc process variables in interactive environment, Journal of Materials Processing Technology. 2008; 203: 72-79.

Pinitrattanapan O. The Quality Control of Gold Jewelry Casting Process Design of Experiment Approach. Master degree thesis of engineer (Engineering Management). Silpakorn University, 2013.

Pisansungkakoon C. Effect of mold temperature on defects for white alloy in loss wax casting process, KMUTT Research and Development Journal, 2017; 1: 91-99.

Montgomery DC. Design and Analysis of Experiments, 8th ed. Singapore: John Wiley & Sons, 2013.

Rajkolhe R, Khan JG. Defect, causes and their remedies in casting process. International Journal of Research in Advent Technology, 2014; 2(3): 375-383.

Sanordontri P. The Jewelry Casting Development by Design and Experiment Analysis a Case Study the Jewelry Factory. Master degree thesis of Engineer (Industrial Engineering). King Mongkuts University of Technology North Bangkok, 2006.

Taguchi G, Chowdhury S, Wu Y. et al. quality engineering handbook. Hoboken, N.J: John Wiley & Sons, 2005.

Zhang XJ, Tong KK, Chan R. et al. Goal Jewellerycasting technology design and defects elimination. Journal of Materials Processing Technology, 1995; 48: 603-609.

Downloads

เผยแพร่แล้ว

2019-01-28