OPTIMIZATION PARAMETERS OF COMPOSITE MATERIALS FOR THERMOFORMING MOLD USING THE DESIGN OF EXPERIMENT

ผู้แต่ง

  • Weerayut Surekhum Faculty of Industrial Technology Management, Muban Chombueng Rajabhat University
  • Noppadol Amdee Faculty of Industrial Technology Management, Muban Chombueng Rajabhat University
  • Adisak Sangsongfa Faculty of Industrial Technology Management, Muban Chombueng Rajabhat University

DOI:

https://doi.org/10.14456/lsej.2024.25

คำสำคัญ:

-

บทคัดย่อ

-

References

Badr NBE, Al-Qahtani KM, Mahmoud AED. Factorial experimental design for optimizing selenium sorption on Cyperus laevigatus biomass and green-synthesized nano-silver. Alexandria Engineering Journal 2020, 59(6):5219-5229.

Gorrepotu SR, Debnath K, Mahapatra RN. Mechanical, Thermal, Morphological, and Fibre characteristics during injection moulding of green composites. Fibers Polym 2023;25(11):331–346.

Inchan C. Mechanical properties of composite materials for thermoforming mold. Industrial Engineering Program, Faculty of Industrial Education, Rajamangala University of Technology Krungthep 2018.

Noguera J. Analysis of Buñuelos Growth Rate Using 2k Factorial Design. Procedia Computer Science 2020,177:267-275.

Liu Z, Lei Q, Xing S. Mechanical characteristics of wood, ceramic, metal and carbon fiber-based PLA composites fabricated by FDM. Journal of Materials Research and Technology 2019;8(5):3741-3751.

Phinsakul S. Development of a mixture of plaster and husk ash for use low costs plaster mould in the local ceramic industry. Rajabhat Journal Science Humanities Social Science 2017;18(1):178-186.

Sonsiri A, Inkampa U, Amdee N, Maneesaeng. Effect and optimal variable of mangosteen peel powder for green sand mold. RMUTP Research Journal 2020;14(1):26-36.

Sonsiri A, Palicamin P, Amdee N. Development of plastic green composite for vacuum mold process. FEAT Journal Farm Engineering and Automation Technology Journal 2021;7(1):1-9.

Sonsiri A. Optimal composition of mixed material for thermoforming mold of plastic plate. Chiangmai: Graduate School, Chiangmai University; 2010.

Sreela-or C, Tharungsri P, Yamkong S. Optimum conditions of using bio-extract from urine with vinasse and manure affecting of marigold. Life Sciences and Environment Journal 2022;23(2):283-296.

Srivabut C. Influence of filler content and optimal formulation under water absorption of wood-plastic composites using mixture design. Thai Industrial Engineering Network Journal 2022;8(1):7-27.

Suwanchana P, Tangjitsichaloen S. Strength improvement of leather bracelet by utilizing experimental design. Engineering Journal Chiang Mai University 2021;28(2):87-99.

Wimol M, Jantarasricha T, Kunhirunbawon S. A study of appropriate parameters of brass investment casting by using design of experiment. Life Sciences and Environment Journal 2019;20(1):39-48.

Yashpal, Jawalkar CS, Kant S, Panwar N, Sharma MD, Pali HS. Effect of particle size variation of bagasse ash on mechanical properties of aluminum hybrid metal matrix composites. Materials Today Proceedings 2020;21(4):2024-2029.

Downloads

เผยแพร่แล้ว

2024-10-22

How to Cite

Surekhum, W. ., Amdee, N., & Sangsongfa, A. . (2024). OPTIMIZATION PARAMETERS OF COMPOSITE MATERIALS FOR THERMOFORMING MOLD USING THE DESIGN OF EXPERIMENT . Life Sciences and Environment Journal, 25(2), 317–330. https://doi.org/10.14456/lsej.2024.25

ฉบับ

ปีที่ 25 ฉบับที่ 2 (2024): กรกฎาคม - ธันวาคม

บท

Research Articles

License

Copyright (c) 2024 Life Sciences and Environment Journal

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Each article is copyrighted © by its author(s) and is published under license from the author(s).