Development of an Integrated Double-Input Multiple-Output Converter Topology with Battery Charger

Authors

  • ปรัชญา สัตยารักษ์
  • กุสุมาลย์ เฉลิมยานนท์
  • ณัฎฐา จินดาเพ็ชร์

Keywords:

Double input,, Multiple output,, Battery charger

Abstract

Multiple-input multiple-output converters are properly used as a power supply for the system that uses two or more renewable energy sources supply to load that require different levels of dc voltages for example in the wireless sensor network system. This paper presents a novel double-input multiple-output converter topology integrated with battery charger to increase reliability of the converter. In this topology, microcontroller is used to control power supplied from two inputs. Moreover, it is used to control charging and discharging of battery in the backup mode of the converter. The control system is designed to work automatically in all situations. A 30W two-input three-output prototype with a 24V battery charging is constructed and tested. The experimental results are presented to verify the theoretical analysis and the effectiveness of the control system.

References

[1] E. Muljadi and H. E. McKenna. “Power quality issues in a hybrid power system”, IEEE Transactions on Industry Applications. vol. 38, no. 3, pp. 803–809, May/Jun 2002.
[2] S. M. Alghuwainem. “Performance analysis of a PV powered dc motor driving a 3 - phase self – excited induction generator”, IEEE Transaction on Energy Conversion,. vol. 11, no. 1, pp. 155–161, Mar 1996.
[3] E. Muljadi and R. Taylor “PV water pumping with a peak-power tracker using a simple six-step square-wave inverter”, Conference Record of Industry Applications. vol. 1,pp. 133-142, Oct 1996.
[4] Z. Chen and E. Spooner. “Grid power quality with variable speed wind turbines”, IEEE Transaction on Energy Conversion. vol. 16, no. 2, pp. 148-154, June 2001.
[5] F. Giraud and Z. M. Salameh. “Steady-state performance of a gridconnected rooftop hybrid wind-Photo-voltaic power system with battery storage”, IEEE Transaction on Energy Conversion. vol. 16, no. 1, pp. 1-7, Mar 2001.
[6] Y. M. Chen, Y. C. Liu and S. H. Lin. “Double-Input PWM DC/DC Converter for High-/Low-Voltage Sources”, IEEE Transactions on Industrial Electronics. vol. 53, no 5, pp. 1538-1545, Oct 2006.
[7] K. P. Yalamanchili, M. Ferdowsi and K. Corzine. “New Double Input DC-DC Converters for Automotive”, IEEE Vehicle Power and Propulsion Conference, vol.06, pp.1-6, Sept 2006.
[8] W. M. Kwok and S. L. Yim. “An Integrated Flyback Converter for DC Uninterruptible Power Supply”, IEEE Transactions on Power Electronics, vol.11, no 2, pp. 318-327, Mar 1996.
[9] N. C. Yi, C. L. Deng, C. T. Kuo and W. W. Cheng “A Multiple-Input Multiple-Output Power Converter With Efficient Power Management”, Journal of the Chinese Institute of Engineers, vol.30, no. 7, pp.1277-1286, 2007.
[10] R. W. Erickson and D. Maksimovic.“Fundamentals of Power Electronics Second Edition”, Kluwer Academic Publisher, 2001.
[11] มนตรี คำเงิน, ธีติมา ตรีพยัคฆ์ และกอบชัย เดชหาญ “วงจรช็อพเปอร์มอดูเลเตอร์โดยใช้วงจรสายพานกระแสแบบแรงดันอินพุทแตกต่างเป็นวงจรพื้นฐาน” วิศวสารลาดกระบัง คณะวิศวกรรมศาสตร์ สจล.ปีที่ 26 ฉบับที่ 1, เดือนมีนาคม 2552 ISSN 0125-1724 วารสารระดับชาติ

Downloads

Published

2020-06-11

How to Cite

[1]
สัตยารักษ์ ป., เฉลิมยานนท์ ก. . ., and จินดาเพ็ชร์ ณ., “Development of an Integrated Double-Input Multiple-Output Converter Topology with Battery Charger”, Eng. & Technol. Horiz., vol. 28, no. 1, pp. 13–18, Jun. 2020.

Issue

Vol. 28 No. 1 (2011): ่january - march

Section

Research Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The published articles are copyrighted by the School of Engineering, King Mongkut's Institute of Technology Ladkrabang.

The statements contained in each article in this academic journal are the personal opinions of each author and are not related to King Mongkut's Institute of Technology Ladkrabang and other faculty members in the institute.
Responsibility for all elements of each article belongs to each author; If there are any mistakes, each author is solely responsible for his own articles.