This is an outdated version published on 2024-04-19. Read the most recent version.

AN EXPERIMENT TO MEASURE THE HALF-LIFE OF RC CIRCUIT USING TINKERCAD PROGRAM

Authors

  • Anucha Kaewpoonsuk
  • Narongrit Maneejiraprakarn
  • Pongsak Khokhuntod Department of Physics, Faculty of Science, Naresuan University

Keywords:

RC circuit, Tinkercad program, Half-life, Capacitance measurement, Natural response

Abstract

The research article presents the application of the Tinkercad program, specifically its Circuits sub-program, for examining the operational characteristics of RC circuits. This work focuses on the circuit's transient response, utilizing a time reference within the program for timekeeping in the experiments. The experiment outlined in the article is divided into three parts. The first part of the experiment aimed to measure the voltage across the capacitor in relation to time and the used capacitance. This part confirms the property of changing the exponential function of the voltage across the capacitor. The second part of the experiment focused on measuring the half-life of the circuit in comparison to the supply voltage and the used capacitance. The results of this experiment confirm that the initial voltage value of the capacitor does not affect the circuit's half-life time. For the third part of the experiment, we measured the circuit's half-life time to analyze its electrical capacity by varying the resistance in the circuit. From the electrical capacity measurement experiment results, we found that the maximum error was equal to 1%. Guidelines for using the research include experimental models and circuit-building techniques for teaching topics related to RC circuits. It can also be modified to create a capacitance measurement system for capacitance sensors.

References

Alexander, C.K., & Sadiku, M.N.O. (2009). Fundamentals of electric circuits. (4th Edition). The McGraw-Hill Companies Inc.

Chen, R. (2022). Research on Drip Irrigation System Based on Self-Controlled System. IOP Conf. Series: Journal of Physics, 2386, 012046, 1-10.

Czaja, Z. (2020). A measurement method for capacitive sensors based on a versatile direct sensor-to-microcontroller interface circuit. Measurement, 155, 107547, 1-11.

Davis, C.E., Piffer, J.L., Cohen, M.D., & Polley, J.P. (2019). Applying Thévenin's Theorem and Kirchhoff's Junction Rule to a Common RC Circuit. The Physics Teacher, 57(4), 242-243.

EasyEDA. (n.d.). EasyEDA Program. Retrieved September, 21, 2023, from www.easyeda.com

Erdogan, R., Saglam, Z., Cetintav, G., & Yilmaz, F.G.K. (2023). Examination of the usability of Tinkercad application in educational robotics teaching by eye tracking technique. Smart Learning Environments, 10(27), 1-23.

Erol, M., & Önder, E.B. (2021). Conceptual framework on teaching capacitors and inductors. Momentum: Physics Education Journal, 5(2), 182-193.

Eryilmaz, S., & Deniz, G. (2021). Effect of Tinkercad on Students' Computational Thinking Skills and Perceptions: A Case of Ankara Province. Turkish Online Journal of Educational Technology- TOJET, 20(1), 25-38.

Galeriu, C., Letson, C., & Esper, G. (2015). An Arduino Investigation of the RC Circuit. The Physics Teacher, 53(5), 285-288.

Ganci, S. (2013). The RC circuit experiment. Physics Education, 29(3), 1-5.

Groff, J.R. (2019). Estimating RC Time Constants Using Sound. The Physics Teacher, 57(6), 393-396.

Hidalgo-López, J.A. Botín-Córdoba, J.A. Sánchez-Durán, J.A., & Oballe-Peinado, Ó. (2019). Fast Calibration Methods for Resistive Sensor Readout Based on Direct Interface Circuitsscar. Sensors, 19(18), 1-19.

Hidalgo-López, J.A., Oballe-Peinado, Ó., Castellanos-Ramos, J., & Sánchez-Durán, J.A. (2021). Two-Capacitor Direct Interface Circuit for Resistive Sensor Measurements. Sensors, 21(4), 1-17.

Hidalgo-López, J.A., Sánchez-Durán, J.A., & Oballe-Peinado, Ó. (2020). Reducing Measurement Time in Direct Interface Circuits for Resistive Sensor Readout. Sensors, 20(9), 1-13.

Husin, N.A., Ramli, M., & Alwi, D.M. (2022). Tinkercad simulation software to optimize online teaching and learning in embedded internet of things. Journal of Counseling and Educational Technology, 5(2), 49-57.

Juanda, E.A., & Khairullah, F. (2020). Tinkercad Application Software to Optimize Teaching and Learning Process in Electronics and Microprocessors Subject. Proceedings of the 6th UPI International Conference on TVET 2020 (TVET 2020), 520, 1-5.

Kaewpoonsuk, A. & Poonart, K. (2011). A Low-Cost Interfacing Circuit for Capacitance Measurement. NU Science Journal, 8(2), 87–96.

Katman, R., Sisuk, N., & Kaewpoonsuk, A. (2022). An experiment to measure the internal resistance of a multimeter on the Tinkercad program. PSRU Journal of Science and Technology, 7(1), 100-116.

Kezerashvili, R.Y. (2012). Teaching RC and RL Circuits using Computer-supported Experiments. IERI Procedia, 2, 609–615.

Laudek, N.H., & Nawi, M.N.M. (2023). Development and Usability of Transistor Module using Tinkercad among UPSI Physics Trainee Teachers. Asian Journal of Education and Social Studies, 49(1), 136-141.

Lima, F.M.S. (2015). A Better Criterion for the Discharging Time in an RC Circuit. The Physics Teacher, 53(1), 44-45.

López-Lapeña, O., Serrano-Finetti, E., & Casas, O. (2016). Low-Power Direct Resistive Sensor-to-Microcontroller Interfaces. IEEE Trans. Instrum. Meas., 65(1), 222-230.

Luchaninov, D., Bazhenov, R., Sabirova, V., Mamyrova, M., & Zholdosheva, A. (2021). Online Training of Students of Applied Physics in the Field of Circuitry. IOP Conf. Series: Journal of Physics, 1889, 022030, 1-6.

Moya, A.A. (2017). Connecting Time and Frequency in the RC Circuit. The Physics Teacher, 55(4), 228-230.

Mungan, C.E. (2021). A gentle introduction to RC and LR circuits. Lat. Am. J. Phys. Educ., 15(3), 1-3.

Oliveira, F., & Paixão, J.A. (2019). The RC circuit with an Olympic twist. Physics Education, 54(3), 035002, 1-9.

OrCAD. (n.d.). OrCAD Program. Retrieved September, 21, 2023, from www.orcad.com

Patel, K., Borole, S., Ramaneti, K., Hejib, A., & Raja Singh, R. (2020). Design and implementation of Sun Tracking Solar Panel and Smart Wiping Mechanism using Tinkercad. IOP Conf. Series: Materials Science and Engineering, 906, 012030, 1-12.

Pili, U., Violanda, R., & Pili, J. (2019). Using a digital voltmeter and a smartphone camera to investigate the RC circuit. Physics Education, 54(3), 033004, 1-4.

Reverter, F. (2012). The Art of Directly Interfacing Sensors to Microcontrollers. J. Low Power Electron., 2(4), 265-281.

Rosanti, Y.P., Sudjito, D.N., & Rondonuwu, F.S. (2019). The elaboration of understanding by design in a physics learning about capacitor circuits. Indonesian Journal of Science and Education, 3(2), 66-75.

Sanjaya, W.S.M, Anggraeni, D., Sambas, A., & Denya, R. (2018). Numerical Method and Laboratory Experiment of RC Circuit using Raspberry Pi Microprocessor and Python Interface. IOP Conf. Series: Journal of Physics, 1090, 012015, 1-7.

Schiavon, G.J., Santos, O.R., Batista, M.C., Braga, W.S., & Bratti, V.M. (2022). Experimental Didactic Kit for teaching resistors, capacitors and RC timing circuits. Physics Education, 57(5), 055019.

Sifuentes, E., Casas, O., Reverter, F., & Pallas-Areny, R. (2008). Direct interface circuit to linearise resistive sensor bridges. Sensors and Actuators A, 147(1), 210–215.

Simić, M. (2022). Microcontroller-based Readout of Resistive Sensors. IFAC PapersOnLine, 55-4, 242–247.

Syed, M.Q., & Lovatt, I. (2020). Seeing Is Believing: Demonstrating the RC Time Constant Visually. The Physics Teacher, 58(6), 402-404.

Tinkercad. (n.d.). Tinkercad Program. Retrieved September, 21, 2023, from https://www.tinkercad.com

Downloads

Published

2024-04-19

Versions

How to Cite

Kaewpoonsuk, A., Maneejiraprakarn, N., & Khokhuntod, P. (2024). AN EXPERIMENT TO MEASURE THE HALF-LIFE OF RC CIRCUIT USING TINKERCAD PROGRAM . PSRU Journal of Science and Technology, 9(1), 55–73. Retrieved from https://ph01.tci-thaijo.org/index.php/Scipsru/article/view/254207

Issue

Section

Research Articles