Sustainable management of plastic waste: Assessment of recycled biodegradable plastic market and projection for the future
Main Article Content
Abstract
Global production of plastics has increased astronomically in the last five decades. This may not be unconnected with the rate of consumption of plastics owing to their increasing applications and good characteristics such as light weight, strength, durability, affordability, corrosion resistance and low production costs. Production of plastic materials accounts for 3 to 5% greenhouse gas (GHG) emissions globally. Reports from published works show that, as of 2015 alone, close to 6300 metric tonnes of synthetic plastic waste were generated, of which only 9% were recycled with 12% being incinerated, and a large proportion, 79%, discarded in the natural environment. Further studies show that a sizeable proportion, 12,000 metric tonnes, of plastic waste may annually find their way into the environment by 2050. The adoption of biodegradable materials to replace the conventional plastics has been proposed and implemented with varying environmental implications. In this paper, a sustainable approach to plastic wastes was examined, taking into consideration the emerging and developing world’s attitudes about plastic waste management. Also discussed in this paper is the projection of the plastic waste market with particular reference to United States and China as global players in the industry. The concluding part of this paper focuses on future trends in plastic innovation with the evolution of nanoscale materials, bio-refining and most importantly cradle-to-cradle packaging materials. It is expected that this paper will assist various bodies involved in plastic waste management for developing better and sustainable methods.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
References
Campuzano F, Brown RC, Martínez JD. Auger reactors for pyrolysis of biomass and wastes. Renew Sustain Energ Rev. 2019;102:372-409.
Abila N. Managing municipal wastes for energy generation in Nigeria. Renew Sustain Energ Rev. 2014;37:182-90.
Adekomaya O, Jamiru T, Sadiku R, Huan Z. Minimizing energy consumption in refrigerated vehicles through alternative external wall. Renew Sustain Energ Rev. 2017;67:89-93.
Babayemi JO, Nnorom IC, Osibanjo O, Weber R. Ensuring sustainability in plastics use in Africa:
consumption, waste generation, and projections. Environ Sci Eur. 2019;31:1-20.
Permana AS, Towolioe S, Aziz NA, Ho CS. Sustainable solid waste management practices and perceived cleanliness in a low income city. Habitat Int. 2015;49:197-205.
Oyake-Ombis L, van Vliet BJM, Mol APJ. Managing plastic waste in East Africa: Niche innovations in plastic production and solid waste. Habitat Int. 2015;48:188-97.
Ezeah C, Roberts CL. Analysis of barriers and success factors affecting the adoption of sustainable management of municipal solid waste in Nigeria. J Environ Manag. 2012;103:9-14.
Brooks AL, Wang S, Jambeck JR. The Chinese import ban and its impact on global plastic waste trade. Sci Adv. 2018;4(6):1-7.
Velis C. Global recycling markets: plastic waste a story for one player - China. Vienna: ISWA; 2014.
Nguyen TTP, Zhu D, Le NP. Factors influencing waste separation intention of residential households in a developing country: Evidence from Hanoi, Vietnam. Habitat Int. 2015;48:169-76.
Choklob W, Gupta RK, Kajorncheappunngam S. PLA blend/RHA permeable composite films for fruit packaging. Eng Appl Sci Res. 2019;46(3):210-8.
Srimanta P, Hovichit P. Evaluation of greenhouse gas reduction from improvement of solid waste management of Khon Kaen University. KKU Eng J. 2013;40(2):203-12.
Abulude F, Fagbayide S, Akinnusotu A, Elisha J, Makinde O. Particulate matter and source identification: A case study of Nigeria. Eng Appl Sci Res. 2019;46(2):151-69.
Laonapakul T. Synthesis of hydroxyapatite from biogenic wastes. KKU Eng J. 2015;42(3):269-275.
Hatti-Kaul R, Nilsson LJ, Zhang B, Rehnberg N, Lundmark S. Designing biobased recyclable polymers for plastics. Trends Biotechnol. 2020;38(1):50-67.
Lambert S, Wagner M. Environmental performance of bio-based and biodegradable plastics: the road ahead. Chem Soc Rev. 2017;46(22):6855-71.
Mohanty AK, Misra M, Drzal L. Sustainable bio-composites from renewable resources: opportunities and challenges in the green materials world. J Polymer Environ. 2002;10:19-26.
Wang Y, Pham DT, Ji C. Self-healing composites: a review. Cogent Eng. 2015;2(1):1075686.
Maaß S, Daphi D, Lehmann A, Rillig MC. Transport of microplastics by two collembolan species. Environ Pollut. 2017;225:456-9.
Vink ET, Rábago KR, Glassner DA, Springs B, O'Connor RP, Kolstad J, et al. The sustainability of NatureWorks™ polylactide polymers and Ingeo™ polylactide fibers: an update of the future. Macromol Biosci. 2004;4:551-64.
Philip S, Keshavarz T, Roy I. Polyhydroxyalkanoates: biodegradable polymers with a range of applications. J Chem Tech Biotechnol. 2007;82(3):233-47.
Chen GQ. A microbial polyhydroxyalkanoates (PHA) based bio-and materials industry. Chem Soc Rev. 2009;38(8):2434-46.
Lettner M, Schöggl JP, Stern T. Factors influencing the market diffusion of bio-based plastics: results of four comparative scenario analyses. J Clean Prod. 2017;157:289-98.
Wang Y, Yin J, Chen GQ. Polyhydroxyalkanoates, challenges and opportunities. Curr Opin Biotechnol. 2014;30:59-65.
Fu H, Li Z, Wang R. Estimating municipal solid waste generation by different activities and various resident groups in five provinces of China. Waste Manag. 2015;41:3-11.
Adekomaya O, Jamiru T, Sadiku R, Huan Z. Sustaining the shelf life of fresh food in cold chain – a burden on the environment. Alexandria Eng J. 2016;55(2):1359-65.
Chen L, Pelton RE, Smith TM. Comparative life cycle assessment of fossil and bio-based polyethylene terephthalate (PET) bottles. J Clean Prod. 2016;137:667-76.
Trivedi J, Aila M, Bangwal D, Kaul S, Garg M. Algae based biorefinery—how to make sense?. Renew Sustain Energ Rev. 2015;47:295-307.
Noreen A, Zia KM, Zuber M, Ali M, Mujahid M. A critical review of algal biomass: A versatile platform of bio-based polyesters from renewable resources. Int J Biol Macromol. 2016;86:937-49.
Zia KM, Noreen A, Zuber M, Tabasum S, Mujahid M. Recent developments and future prospects on bio-based polyesters derived from renewable resources: a review. Int J Biol Macromol. 2016;82:1028-40.
Zeller MA, Hunt R, Jones A, Sharma S. Bioplastics and their thermoplastic blends from Spirulina and Chlorella microalgae. J Appl Polymer Sci. 2013;130(5):3263-75.
Lu W, Ness JE, Xie W, Zhang X, Minshull J, Gross RA. Biosynthesis of monomers for plastics from renewable oils. J Am Chem Soc. 2010;132(43):15451-5.
Byrne CM, Allen SD, Lobkovsky EB, Coates GW. Alternating copolymerization of limonene oxide and carbon dioxide. J Am Chem Soc. 2004;126(37):11404-5.
Bystrzejewska-Piotrowska G, Golimowski J, Urban PL. Nanoparticles: their potential toxicity, waste and environmental management. Waste Manag. 2009;29(9):2587-95.
Roes L, Patel MK, Worrell E, Ludwig C. Preliminary evaluation of risks related to waste incineration of polymer nanocomposites. Sci Total Environ. 2012;417-418:76-86.