THE COMPARISON OF THAI STUPA’S ELEVATION DRAWING BETWEEN THE INSTRUMENT MEASURING AND PHOTOS CONVERTER SYSTEM

  • พิทาน ทองศาโรจน์ ภาควิชานวัตกรรมอาคาร คณะสถาปัตยกรรมศาสตร์ มหาวิทยาลัยเกษตรศาสตร์ กรุงเทพมหานคร 10200
  • มนัญชยา เรืองวงศ์โรจน์ วิทยาลัยชุมชนสมุทรสาคร จ.สมุทรสาคร 74000
Keywords: comparison, Thai stupa’s elevation drawing method, old style instrument measuring, photos converter System

Abstract

The objectives of the study were to investigate the comparison of the Thai stupa’s elevation drawing method from the actual location with the stupas’ measuring instrument and photos converter system by considering time factor and distance factor of the stupa which includes percentage error that the criterion considered. The samples were 20 stupas located in Samut Sakhon province from 12 temples. The methodology used to examine the first factor was to compare which time from what measurement took longer time and why did that happen with the hours and minutes as the unit of measure. The second factor was to consider the distance that obtained from the system converts the photos whether it was much or less in error than using the stupas’ measuring instrument with the unit of measure in percentage.

The research found that time factor in both methods had different advantages and disadvantages. In the stupas’ measuring instrument, it resulted in bigger stupa sample that it took longer time to measure than smaller stupa. Unlike the instrument measuring, the photos converter system did not create any difference under the size condition but it resulted in the detail on the stupa such as carved and stucco that spent more time to accumulate data. For the error factor of the acceptable distance, it was discovered that the photos converter system was able to create resemble accurate distance of 14 bodies sample while the other 6 bodies were in acceptable deviation.

Downloads

Download data is not yet available.

References

[1] Suriya sudsawat and Decha sudsaswat. 2010. Registration of archaeological site in Samutsakhon Province: Office of archeology, Director the 1st Regional Office of Fine arts, Ratchaburi. Ratchaburi Province: Director the 1st Regional Office of Fine arts.

[2] VEERANIJ TORATARANON. 2008. THEKNIK KĀN THĀI PHĀP THIUTHAT. BANGKOK : MIS.

[3] BURIN TRICHINTANACHOT. 2004. KHŪMƯ̄ MĀTTRATHĀN ISO/IEC 17025 : 1999. BANGKOK : JQA MCGROW.

[4] BRITISH STANDARDS INSTITUTION. 2003. MEASUREMENT MANAGEMENT SYSTEMS-REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT. (N.P.) : BRITISH STANDARDS.

[5] THONGSAROJANA P. 2017. THE DEVELOPMENT OF SKILLS IN ARCHITECTURAL DESIGN BY COMPUTER WITH REINFORCEMENT LEARNING FROM PROJECT - BASE OF AUTHENTIC LEARNING. JOURNAL OF INDUSTRIAL EDUCATION, 16(3), P. 16-24.

[6] SANTHI LEKSUKHUM. 2009. ČHĒDĪ : KHWĀMPENMĀ LÆ KHAM SAP RĪAK ʻONGPRAKŌ̜P ČHĒDĪ NAI PRATHĒT THAI. BANGKOK : MATHICHON.

[7] Caponigro, John Paul. 2003. Adobe Photoshop Master Class. 2nd Edition. (N.P.) : Adobe Press.

[8] Pithan Thongsarojana. 2017. kān khīan bǣp sathāpattayakam dūai khō̜mphiutœ̄. Bangkok : Chula Press.
Published
2018-12-28
How to Cite
ทองศาโรจน์พ., & เรืองวงศ์โรจน์ม. (2018). THE COMPARISON OF THAI STUPA’S ELEVATION DRAWING BETWEEN THE INSTRUMENT MEASURING AND PHOTOS CONVERTER SYSTEM. Journal of Industrial Education, 17(3), 40-46. Retrieved from https://ph01.tci-thaijo.org/index.php/JIE/article/view/135118
Section
Research Articles