Radiation Analysis from Sources on Cylindrical Curved Impedance Surface for UHF RFID Systems

Authors

  • พิชชานันท์ วงศ์ศิริธร
  • ชูวงค์ พงศ์เจริญพาณิชย์
  • กิตติศักดิ์ แพบัว
  • ฐิติพงษ์ เลิศวิริยะประภา

Keywords:

Curve Surface,, Impedance Surface,, Radiation Pattern,, RFID,, Tag Antenna

Abstract

Radiation pattern analysis using eigen function of source located on cylindrical curved surface coated with dielectric layers is presented in this paper. The analysis results will be used for UHF RFID applications in case of the tag is affixed on cylindrical curved structure with the coated dielectric layer such as gas tank or oil tanks. The proposed tag antenna is relatively small with easy fabrication and can be used for Thailand standard (920-925 MHz). The proposed antenna is suitable for the actual identification of industrial applications.

References

[1] M. Bolic, D. Simplot-Ryl, I. Stojmenovic, RFID Systems: Research Trends and Challenges, John Wiley& Sons, 2010, Chapter 1.
[2] S. Preradovic, Advanced Radio Frequency Identification Design and Applications, InTech, 2011, Chapter 1.
[3] Z. N. Chen, RFID tag antenna, antennas for portable devices, England, John Wiley & Sons, 2007, Chapter 3.
[4] D. M. Dobkin, The RF in RFID passive UHF in practice, United States of America, Newnes, 2008, Chapter 2.
[5] M.A.Ziai, J.C.Batchelor , "Curved RFID tags for metallic gas cylinders," Electronics Letters , vol.45, no.17, pp.867-869, Aug. 13 2009
[6] G. Marrocco, “The art of UHF RFID antenna design: impedance matching and size-reduction techniques,” IEEE Antennas Propagation Magazine., vol. 50, no. 1, pp. 66-79, 2008. 5
[7] H.M.S Tashi and H.Yu, "Design and simulation of UHF RFID tag antennas and performance evaluation in presence of a metallic surface," Software, Knowledge Information, Industrial Management and Applications (SKIMA), pp.1-5, 8-11 Sept. 2011
[8] Y. Huang, K. Boyle, Antennas from Theory to Practice, John Wiley & Sons, 2008, Chapter 5.
[9] P. Wongsiritorn, T. Lertwiriyaprapa, C. Phongcharoenpanich and K. Phaebua, “Characteristics of RFID C-slot tag antenna on a coated metallic cylindrical surface,” IEEE International Conference on Wireless Information Technology and Systems 2012, pp.1-4, Nov. 2012.
[10] T.B.A. Senior, J.L. Volakis, “Generalized impedance boundary conditions in scattering,” Proceedings of the IEEE, vol. 79, issue 10, pp. 1413-1420, 1991.
[11] C.A. Balanis, Advanced Engineering Electromagnetics (Second edition), John Wiley& Sons, 2012 p.632.
[12] NXP Semiconductors, Ultra High Frequency smart label ICs [online] Available www.nxp.com/ acrobat_ download/ literature/9397/75016225.pdf

Downloads

Published

2020-06-16

How to Cite

[1]
วงศ์ศิริธร พ. . ., พงศ์เจริญพาณิชย์ ช., แพบัว ก., and เลิศวิริยะประภา ฐ. ., “Radiation Analysis from Sources on Cylindrical Curved Impedance Surface for UHF RFID Systems”, Eng. & Technol. Horiz., vol. 32, no. 1, pp. 13–18, Jun. 2020.

Issue

Vol. 32 No. 1 (2015): ่๋January - March

Section

Research Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The published articles are copyrighted by the School of Engineering, King Mongkut's Institute of Technology Ladkrabang.

The statements contained in each article in this academic journal are the personal opinions of each author and are not related to King Mongkut's Institute of Technology Ladkrabang and other faculty members in the institute.
Responsibility for all elements of each article belongs to each author; If there are any mistakes, each author is solely responsible for his own articles.