สมบัติด้านความคงทนของมอร์ต้าร์และคอนกรีตผสมสารเพิ่มกำลังอัด
##plugins.themes.bootstrap3.article.main##
摘要
งานวิจัยนี้มุ่งศึกษาสมบัติด้านความคงทนของคอนกรีตผสมสารเพิ่มกำลังอัด (SA) โดยการเพิ่มเติมและโดยการแทนที่ในปริมาณร้อยละ 5.5, 6.5 และ 7.5 โดยน้ำหนักในปูนซีเมนต์ปอร์ตแลนด์ประเภทที่ 1 (OPC) โดยศึกษาการหดตัวแบบแห้งของมอร์ต้าร์ การเกิดคาร์บอเนชั่นของคอนกรีต ความต้านทานการแทรกซึมคลอไรด์ของคอนกรีต และความต้านทานซัลเฟตของมอร์ต้าร์ ผลการศึกษา พบว่าการหดตัวแบบแห้งของมอร์ต้าร์ผสมเถ้าลอยมีค่าน้อยกว่าของ OPC ล้วนค่อนข้างชัดเจน ส่วนการหดตัวแบบแห้งของมอร์ต้าร์ผสม SA มีค่าน้อยกว่าของ OPC ล้วน โดยเฉพาะเมื่อผสม SA ในปริมาณที่มากขึ้น และการหดตัวแบบแห้งของมอร์ต้าร์ผสม SA โดยการเพิ่มเติมมีแนวโน้มว่าน้อยกว่าของโดยการแทนที่ สำหรับการเกิดคาร์บอเนชั่นของคอนกรีตนั้น พบว่าของคอนกรีตผสมเถ้าลอยมีค่ามากกว่า ส่วนของคอนกรีตผสม SA โดยการเพิ่มเติมมีค่าน้อยกว่า ในขณะของคอนกรีตผสม SA โดยการแทนที่กลับมีแนวโน้มมากกว่า เมื่อเปรียบเทียบกับของคอนกรีต OPC ล้วน และการเพิ่ม SA ในปริมาณที่มากขึ้นทำให้การเกิดคาร์บอร์เนชั่นของคอนกรีตที่มากขึ้น นอกจากนี้พบว่า ความต้านทานการแทรกซึมคลอไรด์ของคอนกรีตผสมเถ้าลอย และของคอนกรีตผสม SA (โดยเฉพาะเมื่อผสม SA ในปริมาณที่มากขึ้น) มีค่าน้อยกว่าของคอนกรีต OPC ล้วน โดย
ความต้านทานการแทรกซึมคลอไรด์ของคอนกรีตผสม SA โดยการเพิ่มเติมมีแนวโน้มว่าจะน้อยกว่าของโดยการแทนที่ สุดท้ายการขยายตัวของมอร์ต้าร์ในสารละลายโซเดียมซัลเฟตนั้น พบว่าของมอร์ต้าร์ปูนซีเมนต์ปอร์ตแลนด์ประเภทที่ 5 ล้วน ของมอร์ต้าร์ผสมเถ้าลอย และของมอร์ต้าร์ผสม SA โดยการแทนที่ มีค่าน้อยกว่า ในขณะของมอร์ต้าร์ผสม SA โดยการเพิ่มเติมมีค่าไม่แตกต่าง เมื่อเปรียบเทียบกับของมอร์ต้าร์ OPC ล้วน และการผสม SA ในปริมาณที่ต่างกันให้
ค่าการขยายตัวของมอร์ต้าร์ที่ไม่แตกต่างกัน ส่วนการสูญเสียน้ำหนักของมอร์ต้าร์ในสารละลายแมกนีเซียมซัลเฟตนั้น พบว่าของมอร์ต้าร์ปูนซีเมนต์ปอร์ตแลนด์ประเภทที่ 5 ล้วน และของมอร์ต้าร์ผสม SA มีค่าน้อยกว่า ในขณะของ
มอร์ต้าร์ผสมเถ้าลอยมีค่ามากกว่า เมื่อเปรียบเทียบกับของมอร์ต้าร์ OPC ล้วน และการผสม SA ในปริมาณที่ต่างกันให้ค่าการสูญเสียน้ำหนักของมอร์ต้าร์ที่ใกล้เคียงกัน
##plugins.themes.bootstrap3.article.details##
The manuscript, information, content, picture and so forth which were published on Frontiers in engineering innovation research has been a copyright of this journal only. There is not allow anyone or any organize to duplicate all content or some document for unethical publication.
参考
Julnipitawong P, Tangtermsirikul S. Investigation on Performance of Concrete and Mortar Using Active Chemical Compound Rockfil-HSM. Final Report Submission to BKG Group Corporation. 2013.
Julnipitawong P, Tangtermsirikul S. A Study on Effect of Strength Accelerating Compound on Properties of Concrete and Mortar. volume 2, No. 1, January – June 2014; pp. 17-29.
Thai Industrial Standard. TIS 15-2555; Portland Cement Part 1 Specification. Ministry of Industry. Bangkok. 2012. (in Thai)
Thai Industrial Standard. TIS 2135-2545; Coal Fly Ash for Use as an Admixture in Concrete. Ministry of Industry. Bangkok. 2002. (in Thai)
American Society for Testing and Materials. ASTM C 596 - 01: Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement. Annual Book of ASTM Standards. 2001.
American Society for Testing and Materials. ASTM C 109 - 07: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens). Annual Book of ASTM Standards. 2007.
American Society for Testing and Materials. ASTM C 856 - 04: Standard Practice for Petrographic Examination of Hardened Concrete. Annual Book of ASTM Standards. 2004.
American Society for Testing and Materials. ASTM C 1202 - 12: Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration. Annual Book of ASTM Standards. 2012.
American Society for Testing and Materials. ASTM C 1012 - 04: Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution. Annual Book of ASTM Standards. 2004.
Al-Amoudi, O. S. B.. Mechanisms of Sulfate Attack in Plain and Blended Cement: a Review. Proceeding of the International Seminar. September 1999. University of Dundee, Scotland, UK. pp. 247-260.