DEVELOPMENT INDUSTRIAL MATERIAL FROM TEAK WOOD AGED BETWEEN 7-14 YEARS FOR COMMERCIAL AND SUSTAINABLE USE.

Main Article Content

จตุรงค์ เลาหะเพ็ญแสง

Abstract

This paper concentrates on Development Industrial Material from Teak wood aged  between 7-14 years for Commercial and sustainable use. The research methodology was mix research.  In terms of the Quality and Quantity research, sample groups were composed of 5 Experts (Teak wood Properties Improve) and 10 (Experts Teak wood Designers). The research methods were experimental and focus group technique .The statistics used were frequency, percentage, arithmetic means, and standard deviation. The research found that there are 2 output. The first output to improve physical properties and water resistant property of young teak wood products in 3 process 1) Prepare two solutions (Solution A: Maleic anhydride 10% in a thinner, Solution B: 10% AKD in Thinner) 2)Apply solution A to seep into the wood. Then bake at 90 ° C for 20 minutes (improving wood properties). 3)Apply solution B over the wood surface. Then bake at 90 ° C for 20 minutes (improving wood surface properties). The second output was Development Industrial Material from Teak wood aged  between 7-14 years for timber and lumber by wooden joint technique.  Based on evaluation of the experts, the Development Industrial Material from Teak wood aged  between 7-14 years for Commercial and sustainable use was highly appropriate ( gif.latex?\bar{x}= 3.75).

Article Details

How to Cite
เลาหะเพ็ญแสง จ. (2018). DEVELOPMENT INDUSTRIAL MATERIAL FROM TEAK WOOD AGED BETWEEN 7-14 YEARS FOR COMMERCIAL AND SUSTAINABLE USE. Journal of Industrial Education, 17(2), 109–116. Retrieved from https://ph01.tci-thaijo.org/index.php/JIE/article/view/145180
Section
Research Articles

References

[1] Plant Genetic Conservation Project Office. 2559. Documentation.Describing the creative Masterplan of Plant Genetic Conservation Project under the royal initiative of Her Royal Highness Princess Maha Jakri Sirindhorn.( Plant Genetic Conservation Project Office Online ) . Retrieved May 5, 2560 from: https://www.rspg.or.th/

[2] Suriyan Mulsan. 2009. Teak wood processing and furniture industry. Matichonabot folk technology online 21st year No. 448. p. 54 Retrieved May 5, 2560 from: https://info.matichon.co.th/techno

[3] Economic Development Board National Society And TCDC . 2552. Preliminary Report creative economy.Bangkok: B . C . Press ( Boon Chin ) Limited .

[4] Faul, F., Erdfelder, E., Buchner, A., & Lang, A.-G. 2009. Statistical power analyses using G*Power 3.1: Tests for correlation and regression analyses. Behavior Research Methods, 41, p. 1149-1160.

[5] Nongluk viratchai . 2555. The sample sizes in the research hypothesis . documentation The lecture entitled "How accurate and up to date to determine the sample size, " a project organized by the Research Zone Learning Center at the Research Center for Learning Research . Commission National Research ( college.) On January 26, 2555 .Time 9:00 to 12:00 pm.

[6] Udomsak Saributr , et al.2560.Communities products design from teak wood in world heritage site sukhothai province. Proceedings of The seventh National Conference on Developing Real-Life Learning Experiences (DRLE 2017). King Mongkut’s Institute of Technology Ladkrabang , Bangkok, p. 87

[7] Kesaya saowapa , et al.2560.Study and development of Home wall decoration products from 7-14 years old teak .Proceedings of The seventh National Conference on Developing Real-Life Learning Experiences (DRLE 2017). King Mongkut’s Institute of Technology Ladkrabang, Bangkok, p.91

[8] Buraparat Nanchai , et al.2558. Study and Development products from local wisdom of Baan Tawal village , Chiangmai. Journal of Industrial Education, 14(1), p. 116-120.