Study of Unbalanced Voltage on Rotor Classes of Induction Motor According to NEMA Standard
Main Article Content
Abstract
This investigation studies core loss and thermal distributions. There are four types of 3-phase induction motors that meet the National Electrical Manufacturers Association (NEMA) standard when receiving unbalanced voltage by testing the motor under unbalanced voltage conditions. The conditions are different. The model analysis method was used in conjunction with the Finite Element Method (FEM) as well as experimental and computational theory. To analyze the change in magnetic flux density and the resulting temperature. Along with finding a conclusion on the effect on the motor when the voltage is unbalanced.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
References
Kersting, W. H., & Phillips, W. H. (1997). Phase frame analysis of the effects of voltage unbalance on induction machines. IEEE Transactions on Industry Applications, 33(2), 415-420.
Lee, C. Y., Chen, B. K., Lee, W. J., & Hsu, Y. F. (1998). Effects of various unbalanced voltages on the operation performance of an induction motor under the same voltage unbalance factor condition. Electric Power Systems Research, 47(3), 153-163.
Siddique, A., Yadava, G. S., & Singh, B. (2004, September). Effects of voltage unbalance on induction motors. In Conference Record of the 2004 IEEE International Symposium on Electrical Insulation (pp. 26-29). IEEE.
Chen, K. (2009, March). Iron-loss simulation of laminated steels based on expanded generalized steinmetz equation. In 2009 Asia-Pacific Power and Energy Engineering Conference (pp. 1-3).
IEEE. Motors and Generators, ANSI/NEMA Standard MG1-1993.
IEEE Standard Test Procedure for Polyphase Induction Motors and Generators, IEEE Standard 112, 1991.
Dugan, R. C., McGranaghan, M. F., & Beaty, H. W. (1996). Electrical power systems quality. New York.
Hwang, C. C., Tang, P. H., & Jiang, Y. H. (2005). Thermal analysis of high-frequency transformers using finite elements coupled with temperature rise method. IEE Proceedings-Electric Power Applications, 152(4), 832-836.
Reece, A. B. J., & Preston, T. W. (2000). Finite element methods in electrical power engineering (Vol. 46). Courier Corporation.
Shumei, C., Ying, D., & Liwei, S. (2006, September). Rotor slots design of induction machine for hybrid electric vehicle drives. In 2006 IEEE Vehicle Power and Propulsion Conference (pp. 1-3). IEEE.
Kirtley, J. L., Cowie, J. G., Brush, E. F., Peters, D. T., & Kimmich, R. (2007, June). Improving induction motor efficiency with die-cast copper rotor cages. In 2007 IEEE Power Engineering Society General Meeting (pp. 1-6). IEEE.
Turcanu, O. A., Tudorache, T., & Fireteanu, V. (2006, May). Influence of squirrel-cage bar cross-section geometry on induction motor performances. In International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. (pp. 1438-1443). IEEE.
Fireteanu, V., Tudorache, T., & Turcanu, O. A. (2007, May). Optimal design of rotor slot geometry of squirrel-cage type induction motors. In 2007 IEEE International Electric Machines & Drives Conference (Vol. 1, pp. 537-542). IEEE.
Pillay, P., & Manyage, M. (2001). Definitions of voltage unbalance. IEEE Power Engineering Review, 21(5), 50-51.