Effect of precursor of refinement Y211 on the superconductivity and structural of Y257 superconductor

Authors

  • Thitipong Kruaehong Suratthani Rajabhat University
  • Supphadate Sujinnapram Department of Physics, Faculty of Liberal Arts and Science, Kasetsart University, Kamphaeng Saen Campus, Nakhon Pathom, 73140 Thailand
  • Pongkaew Udomsamuthirun Prasanmitr Physics Research, Department of Physics, Faculty of Science, Srinakharinwirot University, Bangkok, 10110 Thailand
  • Tunyanop Nilkamjon Prasanmitr Physics Research, Department of Physics, Faculty of Science, Srinakharinwirot University, Bangkok, 10110 Thailand
  • Sermsuk Ratreng Prasanmitr Physics Research, Department of Physics, Faculty of Science, Srinakharinwirot University, Bangkok, 10110 Thailand

DOI:

https://doi.org/10.55674/jmsae.v12i3.247682

Keywords:

257 superconductor, Non-superconducting compound, Y211 superconductor

Abstract

Y211 was added to the Y257 superconducting material at concentrations of 0, 0.10, and 0.20 mol using a solid-state reaction synthesis method. As the concentration of Y211 increased, both the onset critical temperature and the offset critical temperature decreased. The synthesized samples contained a combination of superconducting and non-superconducting compounds. The superconducting compound exhibited an orthorhombic structure with the Pmmm space group. Additionally, three different types of non-superconducting compounds were identified in the samples. The percentage of non-superconducting compounds increased with the addition of Y211. The surface morphology revealed heterogeneous elements and a random distribution of grain sizes. The samples contained Y, Ba, Cu, and O elements without any detectable impurities.

References

P. Marsh, R.M. Fleming, M.L. Mandich, A.M. Desantolo, J. Kwo, M, Hong, L.J. Martinez-Miranda, Crystal Structure of the 80 K Superconductor YBa2Cu4O8, Nature. 334 (1988) 141−143.

P. Bordet, C. Chaillout, J. Chenavas, J.L. Hodeau, M. Marezio, J.Karpinski, E. Kaldis, Structure Determination of the New High Temperature Superconductor Y2Ba4Cu7O14+x, Nature. 334 (1988) 596 − 598.

K. Wu, J.R. Ashburn, C.J. Torng, P.H. Hor, R.L. Meng, L. Gao, Z.J. Huang, Y.Q. Wang, C.W. Chu, Superconductivity at 93 K in a New Mixed-Phase Y-Ba-Cu-O Compound System at Ambient Pressure, Phys. Rev. Lett. 58 (1987) 908 − 910.

T. Jiqiang, F. Jiancheng, S.G.Shuzhi, Role of superconducting magnetic bearings and active magnetic bearing in attitude control and energy storage flywheel, Physica C. 483(2012) 178 − 185.

O. Hiroyuki, T. Yuichi, Study and electric motor with bulk superconductors in the rotor, Journal of mat Proc and Tech. 108(2001) 148 − 151.

T. Oka, T. Kimura, D. Mimura, H. Fukazawa, S. Fukui, J. Ogawa, T. Sato, M. Ooizumi, K. Yokoyama, M. Tsujimura, T. Terasawa, Magnetic precipitate separation for Ni plating wate liquid using HTS bulk magnet. Physica C. 484 (2013) 325 − 328.

C.W. Smith, P.J. Dolan, Determining transport parameters for superconductor/normal metal point contact at fixed temperature from conductance versus magnetic data, Physica C. 471 (2013) 285 − 289.

Y. Arai, H. Seino, K. Yoshizawa, K. Nagashima, Development of superconducting magnetic bearing with superconducting coil and bulk superconductor for flywheel energy storage system, Physica C. 494 (2013) 250 − 254.

T. Kruaehong, Preparation and Characterization of the new Y257 superconductors, Adv. Mat. Res. 770 (2013) 22 − 25.

J. Rodriguez-Carvajal, Program FULLPROF. Laboratoire Leon Brillouin (CEACNRS), (1991) Version, 3.

A. Aliabadi, A. Farshchi, M. Akhavan, A New Y-based HTSC with Tc above 100 K, Physica C. 469 (2009) 2012 − 2014.

J. Mucha, K. Rogacki, H. Misiorek, A. Jezowski, A. Wisniewski, R. Puzniak, Influence of the Y211 phase on anisotropic transport properties and vortex dynamics of the melt-textured Y123/Y211 composites, Physica C. 470 (2010) S1009 – S1010.

H. Zhang, K. Du, H. Ye, Z.H. Wang, Oxygen diffusion in the ceramic composite of YBa2Cu3Oy with Y2BaCuO5. Physica C. 386 (2003) 249 – 253

F. Delorme, J.-F. Bardeau, C. Harnois, I. Monot-Laffez, Evidence of oxygen content heterogeneity in TSMTG YBa2Cu3O7-δ/Y2BaCuO5 composites by micro-Raman spectrometry, Physica C. 468 (2008) 388 – 393.

A. Jezowski, K. Rogacki, T. Puig, X. Obradors, Anisotropy of the thermal conductivity of melt-textured Y123/Y211 composite, Physica B. 284 – 288 (2000) 1015 – 1016.

Y. Imagawa, Y. Shiohara, Effect of Precursor Processing on refinement of Y2BaCuO5 in Melt-Processed YBa2Cu3O6+x by Unidirectional Solidification, Physica C. 268 (1996) 61 – 70.

K. Nakazato, M. Muralidhar, M.R. Koblischka, M. Murakami, Fabrication of bulk Y-Ba-Cu-O superconductors with high critical current densities through the infiltration-growth process, Cryogenics. 63 (2014) 129 – 132.

F.N. Werfel, U. Floegel-Delor, T. Riedel, B. Goebel, R. Rothfeld, P. Schirrmeister, D. Wippich, Large-scale HTS bulks for magnetic application, Physica C. 484 (2013) 6 – 11.

Downloads

Published

2023-09-01

How to Cite

Kruaehong, T., Sujinnapram, S., Udomsamuthirun, P., Nilkamjon, T., & Ratreng, S. (2023). Effect of precursor of refinement Y211 on the superconductivity and structural of Y257 superconductor. Journal of Materials Science and Applied Energy, 12(3), 247682. https://doi.org/10.55674/jmsae.v12i3.247682

Issue

Vol. 12 No. 3 (2023): Journal of materials science and applied energy (September – December)

Section

Research Article

License

Copyright (c) 2023 Journal of Materials Science and Applied Energy

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.