Production Planning and Machine Maintenance Schedule of Dragon Green Energy Company, Limited
DOI: 10.14416/j.ind.tech.2024.04.005
Keywords:
Tapioca Starch Production, otal Production Planning, Scheduling Maintenance, GapAbstract
This research has led to the problem of Dragon Green Energy Co., Ltd., a factory that produces tapioca starch with a production capacity is about 25-50 tons per day. The company has encountered problems in total production planning and scheduling maintenance. The research, therefore, developed a mathematical schedule modeling method to solve problems and the development of integrated applications using scheduling rules, Heuristics Genetics Algorithms (GA), and Local Search (L) becoming Integrated Methods (GA+L). The research found that the total production planning in 2022 was close to the actual production measured from (GAP) which was equal to 2.3 tons, with a margin of error of 0.307 percent. The researchers obtained the value of the company's maintenance scheduling with problems of various sizes, which the program can schedule maintenance using the scheduling rules Heuristic method (GA) and combination method. In scheduling results, the lowest makespan value was measured by the good comparison gap (Gap) together with the comparison of the percentage of time when the machine crashed before and after the research. It was found that the mean value between machine failures (MTBF) increased by 25.332% and the average machine downtime was reduced after the research, accounting for 43.928 percent. This research was therefore by the objectives.
References
X. Wang, Y. Sun and B. Peng, Industrial linkage and clustered regional business cycles in China, International Review of Economics and Finance, 2023, 85, 59-72.
M.A. Nguyen, G.T. Dang, M.H. Ha, and M.T. Pham, The min-cost parallel drone scheduling vehicle routing problem, European Journal of Operational Research, 2022, 299(3), 910-930.
I.B. Suryaningrat, Raw material procurement on agro-industrial supply chain management: A Case Survey of Fruit Processing Industries in Indonesia, Agriculture and Agricultural Science Procedia, 2016, 9, 253-257.
A.N. Mustapha, Y. Zhang, Z. Zhang, Y. Ding, Q. Yuan and Y. Li, Taguchi and ANOVA analysis for the optimization of the microencapsulation of a volatile phase change material, Journal of Materials Research and Technology, 2021, 11, 667-680.
P. Arunkumar, N. Muthukumaran, M.M. Samyb, L. Prabhu and R. Rajeshwari, Investigation on the effect of process parameters in abrasive Jet Machining process using full factorial design, International Conference on Sustainable materials, Manufacturing and Renewable Technologies, 2021, 47(15), 5395-5400.
V.T.W. Thuppahige, L. Moghaddam, Z.G. Welsh, T. Wang, and A. Karim, Investigation of critical properties of Tapioca (Manihot esculenta) peel and bagasse as starch-rich fibrous agro-industrial wastes for biodegradable food packaging, Food Chemistry, 2023, 422, 1-12.
J.D. Fonseca, A.M. Latifi, A. Orjuela, G. Rodríguez and I.D. Gil, Modeling, analysis and multi-objective optimization of an industrial batch process for the production of tributyl citrate, Computers & Chemical Engineering, 2020, 132, 106603.
T. Krishnan, A. Khan and J. Alqurni, Aggregate production planning and scheduling in the Industry 4.0 Environment, Procedia Computer Science, 2022, 204, 784-793.
P.D. Cachinero, J.I. Muñoz-Hernandez and J. Contreras, Integrated operational planning model considering optimal delivery routing, incentives and electric vehicle aggregated demand management, Applied Energy, 2021, 304, 1-23.
B. Liu, J. Pang and Y. Zhao, Optimal condition-based maintenance policy for leased equipment considering hybrid preventive maintenance and periodic inspection, Reliability Engineering & System Safety, 2023, 242, 109724.
Y. Han, X. Zhen and Y. Huang, Multi-objective optimization for preventive maintenance of offshore safety critical equipment integrating dynamic risk and maintenance cost, Ocean Engineering, 2022, 245, 110557.
S. Frisch, P. Hungerlander, A. Jellen, B. Primas, S. Steininger and D. Weinberger, Solving a real-world locomotive scheduling problem with maintenance constraints, Transportation Research Part B: Methodological, 2021, 150, 386-409.
Z. Boumallessa, H. Chouikhi, M. Elleuch and H. Bentaher, Modeling and optimizing the maintenance schedule using dynamic quality and machine condition monitors in an unreliable single production, Reliability Engineering and System Safety, 2023, 235, 109216.
A.M. Fathollahi-Fard, K.Y. Wong and M. Aljuaid, An efficient adaptive large neighborhood search algorithm based on heuristics and reformulations for the generalized quadratic assignment problem, Engineering Applications of Artificial Intelligence, 2023, 126(A), 106802.
R. Ogunsakin and N. Mehandjiev, Towards autonomous production: Enhanced meta-heuristics algorithm, Procedia Computer Science, 2022, 200, 1575-1581.
C. Destouet, H. Tlahig, B. Bettayeb and B. Mazari, Flexible job shop scheduling problem under Industry 5.0: A survey on human reintegration, environmental consideration, and resilience improvement, Journal of Manufacturing Systems, 2023, 67, 155-173.
R. Chaouch, H. Ghorbel and S. Khalfallah. Model for the classification of scheduling problems based on ontology, Procedia Computer Science, 2021, 181, 890–896.
R. Cordone and P. Hosteins, A bi-objective model for the single-machine scheduling problem with rejection cost and total tardiness minimization, Computers and Operations Research, 2019, 102, 130-140.
Q. Zhang, Y. Liu, T. Xiahou, and H.Z. Huang, A heuristic maintenance scheduling framework for a military aircraft fleet under limited maintenance capacities, Reliability Engineering and System Safety, 2023, 235, 109239.
J. Zheng, J. Zhong, M. Chen and K. He, A reinforced hybrid genetic algorithm for the traveling salesman problem, Computers and Operations Research, 2023, 157, 106249.
O. Tayfun and T. Aysegul, A hybrid metaheuristic algorithm based on iterated local search for vehicle routing problems with simultaneous pickup and delivery, Expert Systems with Applications, 2022, 202, 117401.
A. Phuk-in, Production-scheduling problem: A case of SD tractors company, limited, The Conference of Industrial Engineering Network (IE network Thailand 2022), Proceeding, 2022, 469-474.
G. Yuxiang, C.Yuning, G. Zhongxue, Z. Zhuo, D. Wenchao, Z. Hongda, L. Yi and O. Chun, Hybrid flow-shop scheduling in collaborative manufacturing with a multi-crossover-operator genetic algorithm, Journal of Industrial Information Integration, 2023, 36, 100514.
A. Anita, K. Laszlo and B. Tamas, An Attraction Map Framework of a Complex Multi-Echelon Vehicle Routing Problem with Random Walk Analysis, Appl Sci, 2021, 11, 1-23.
H. Xinxin, W. Zhijian, L. Yanfeng, K. Svetlana, D. Wenhua, W. Junyuan and W. Wenzhao, Joint decision-making of parallel machine scheduling restricted in job-machine release time and preventive maintenance with remaining useful life constraints, Reliability Engineering and System Safety, 2023, 222, 108429.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
ผลงานวิจัยและบทความวิชาการที่ปรากฏในวารสารนี้ เป็นความคิดเห็นอิสระของผู้เขียน ผู้เขียนจะต้องเป็นผู้รับผิดชอบต่อผลทางกฎหมายใด ๆ ที่อาจจะเกิดขึ้นจากบทความนั้น กองบรรณาธิการและคณะจัดทำวารสารฯไม่จำเป็นต้องเห็นด้วยเสมอไป