การออกแบบบัลลาสต์อิเล็กทรอนิกส์อย่างเป็นระบบ
##plugins.themes.bootstrap3.article.sidebar##
已出版:
6月 30, 2006
##plugins.themes.bootstrap3.article.main##
摘要
บทความนี้นำเสนอแนวทางการออกแบบบัลลาสต์อิเล็กทรอนิกส์อย่างเป็นระบบเพื่อให้บัลลาสต์อิเล็กทรอนิกส์ทำงานร่วมกับฟลูออเรสเซนต์ที่กำลังออกเท่ากับพิกัดและมีเสถียรภาพการวิเคราะห์และออกแบบจะใช้สมการจากวงจรสมมูลสำหรับความถี่หลักมูลของวงจรโหลดของคอนเวอร์เตอร์และมีจำลองการทำงานและการทดลองเพื่อยืนยันถึงความถูกต้องของการออกแบบ
##plugins.themes.bootstrap3.article.details##
##submission.howToCite##
บุญเจียม ไ. . (2006). การออกแบบบัลลาสต์อิเล็กทรอนิกส์อย่างเป็นระบบ. Frontiers in Engineering Innovation Research, 7, 54–63. 取读于 从 https://ph01.tci-thaijo.org/index.php/jermutt/article/view/242280
栏目
Research Articles
The manuscript, information, content, picture and so forth which were published on Frontiers in engineering innovation research has been a copyright of this journal only. There is not allow anyone or any organize to duplicate all content or some document for unethical publication.
参考
[1] Marian K. Kaimierczuk, Dariusz Czarkowski Resonant rower Converters,(n.): John Wiley and
sons.Inc. . 1995.
[2] J.R. Coaton, A.M. Marsden. Lamp and Lightine.(np.): John Wiley and sons,Inc., 1990.Thomas J Ribarich, John J. Ribarich. "A New model for high-firequency electronic ballast design". Con.Record of IEEE/IAS Annual Meeting, 1997. pp2334-2339.
[3] Thomas J. Ribarich, John J. Ribarich."A New procedure for high-frequency electronic ballast design". Conf. Record of IEEE/IAS Annual Meeting ,1997.
[4] Thomas J. Ribarich, John J. Ribarich."A New control method for Dimmable high-frequency electronic ballasts'. Conf. Record of IEEE/IAS Annual Meeting, 1998.
[5] Hesterman B.L., Poehlman T.M. "A novel parallel-resonant programmed start electronic ballast". Conf. Record of IEEE/IAS Annual Meeting 1999, pp 249-255.
[6] Thomas Ribarich."A System Approach to Ballast IC Design". PCIM Europe Nuremburg, Germany June 22-24, 1999.
[7] Moo C.S,, Cheng H.L., Chen H.N. and Yen H.C. "Designing dimmable electronic ballast with frequency control". APEC Annual meeting, 1999,pp 727-733.
[8] Chin S.Moo., Hung L. Cheng., Tsai F. Lin and Hau C. Yen. "'Designing a dimmable electronic .ballast with voltage control for fluorescent lamp ISIE 1999, pp 786-791.
[9] Hammer, E.E.,"Photocell Enhanced Technique for Measuring Electrode Starting Temperature in fluorescent lamps".Plasma Science, ICOPS '99..IEEE International Conference on , 1999,pp 329 -329
[10] Hammer, E.E.. "Compact light source performance in recessed type luminaires".Industry Applications Conference. Thirty-Third IAS Annual Meeting,, 1998, pp 2145 -2150 vol.3
[11] Hammer, E.E. "Starting voltage characterristics of 40 w biaxial fluorescent lamp". Industry Applications Society Annual Meeting, 1988.,Conference Record of the 1988 IEEE, 1988.pp 1835 -1841 vol.2
[12] Hammer, E.E. "Effects of changing line voltage with various fluorescent systems"'. Industry Applications, IEEE Transactions on Volume:24 4 , July-Aug. 1988 , pp 692 -699
[13] Gluskin E. "A contribution to the theory of fluorescent lamp circuits". IEEE Circuit and system, 1988, pp 1385-1388.
[14] Gluskin E. "'On the theory of fluorescent lamp circuits. IEE science, Measurement and Technology 1990, pp 201-208.
[15] Wu T.-F., Hung J.-C., Yu T.-H.,"A Pspice model for fluorescent lamps operated at high frequencies'.IEEE IECON 21* International Conference, 1995,pp 359-364.
[16] Thomas J. Ribarich, John J. Ribarich."A new high-frequency fluorescent lamp model". IEEE IAS Annual meeting, 1998, pp 2094-2098.
[17] T. Liu, K.J. Tseng and D.M. Vilathgamuwa."A Pspice model for the electrical characteristics of fluorescent lamp". IEEE/IAS conference record,1998.
[18] Mark Sun, Bryce L. Hesterman. "Pspice high-frequency dynamic fluorescent lamp model".IEEE transaction on power electronics, Vol.13 No.2,1998.
[19] Zhu P., Hui S.Y.R. "Modeling of a High-frequency operated fluorescent lamp in an electronic ballast environment . IEE ISMTEV,1998, pp 111-116.
[20] Onishi N., Shiomi T., Okude A. and Yamauchi T."A Fluorescent lamp model for high frequency
wide range dimming electronic ballast simulation"IEEE APEC conference record ,1999,pp 1001-1005.
[21] Urs Mader. " Steady-state analysis of a voltage-fed inverter with second-order network and fluorescent lamp load". IEE IEE ISMTEV,1998,pp 110-116.
sons.Inc. . 1995.
[2] J.R. Coaton, A.M. Marsden. Lamp and Lightine.(np.): John Wiley and sons,Inc., 1990.Thomas J Ribarich, John J. Ribarich. "A New model for high-firequency electronic ballast design". Con.Record of IEEE/IAS Annual Meeting, 1997. pp2334-2339.
[3] Thomas J. Ribarich, John J. Ribarich."A New procedure for high-frequency electronic ballast design". Conf. Record of IEEE/IAS Annual Meeting ,1997.
[4] Thomas J. Ribarich, John J. Ribarich."A New control method for Dimmable high-frequency electronic ballasts'. Conf. Record of IEEE/IAS Annual Meeting, 1998.
[5] Hesterman B.L., Poehlman T.M. "A novel parallel-resonant programmed start electronic ballast". Conf. Record of IEEE/IAS Annual Meeting 1999, pp 249-255.
[6] Thomas Ribarich."A System Approach to Ballast IC Design". PCIM Europe Nuremburg, Germany June 22-24, 1999.
[7] Moo C.S,, Cheng H.L., Chen H.N. and Yen H.C. "Designing dimmable electronic ballast with frequency control". APEC Annual meeting, 1999,pp 727-733.
[8] Chin S.Moo., Hung L. Cheng., Tsai F. Lin and Hau C. Yen. "'Designing a dimmable electronic .ballast with voltage control for fluorescent lamp ISIE 1999, pp 786-791.
[9] Hammer, E.E.,"Photocell Enhanced Technique for Measuring Electrode Starting Temperature in fluorescent lamps".Plasma Science, ICOPS '99..IEEE International Conference on , 1999,pp 329 -329
[10] Hammer, E.E.. "Compact light source performance in recessed type luminaires".Industry Applications Conference. Thirty-Third IAS Annual Meeting,, 1998, pp 2145 -2150 vol.3
[11] Hammer, E.E. "Starting voltage characterristics of 40 w biaxial fluorescent lamp". Industry Applications Society Annual Meeting, 1988.,Conference Record of the 1988 IEEE, 1988.pp 1835 -1841 vol.2
[12] Hammer, E.E. "Effects of changing line voltage with various fluorescent systems"'. Industry Applications, IEEE Transactions on Volume:24 4 , July-Aug. 1988 , pp 692 -699
[13] Gluskin E. "A contribution to the theory of fluorescent lamp circuits". IEEE Circuit and system, 1988, pp 1385-1388.
[14] Gluskin E. "'On the theory of fluorescent lamp circuits. IEE science, Measurement and Technology 1990, pp 201-208.
[15] Wu T.-F., Hung J.-C., Yu T.-H.,"A Pspice model for fluorescent lamps operated at high frequencies'.IEEE IECON 21* International Conference, 1995,pp 359-364.
[16] Thomas J. Ribarich, John J. Ribarich."A new high-frequency fluorescent lamp model". IEEE IAS Annual meeting, 1998, pp 2094-2098.
[17] T. Liu, K.J. Tseng and D.M. Vilathgamuwa."A Pspice model for the electrical characteristics of fluorescent lamp". IEEE/IAS conference record,1998.
[18] Mark Sun, Bryce L. Hesterman. "Pspice high-frequency dynamic fluorescent lamp model".IEEE transaction on power electronics, Vol.13 No.2,1998.
[19] Zhu P., Hui S.Y.R. "Modeling of a High-frequency operated fluorescent lamp in an electronic ballast environment . IEE ISMTEV,1998, pp 111-116.
[20] Onishi N., Shiomi T., Okude A. and Yamauchi T."A Fluorescent lamp model for high frequency
wide range dimming electronic ballast simulation"IEEE APEC conference record ,1999,pp 1001-1005.
[21] Urs Mader. " Steady-state analysis of a voltage-fed inverter with second-order network and fluorescent lamp load". IEE IEE ISMTEV,1998,pp 110-116.