Phenomena study of polymer blend between polycarbonate and polycarbonate oligomers
Article Sidebar
Main Article Content
บทคัดย่อ
This paper presents a study on distribution phenomena of polymer blends between Polycarbonate Oligomer ( PC Oligomer) and Polycarbonate (PC) with different oligomer contents and fabrication conditions. The samples were prepared in CDform by injection molding and were then cut into 6 pieces with varies distance from its gate. Consequently, each cut samples was sliced with thickness of 100, 400 and 200 m from its surface, respectively. The sliced samples were subjected to differential scanning calorimeter (DSC) analysis to confirm the oligomer contents distribution. It was found that both oligomer constitutions and injection conditions have significant influenced on the phenomena of injection products. The studied results are valuable for application to plastic industries.
Article Details
บทความ ข้อมูล เนื้อหา รูปภาพ ฯลฯ ที่ได้รับการตีพิมพ์ในวารสารแนวหน้าวิจัยนวัตกรรมทางวิศวกรรม ถือเป็นลิขสิทธิ์ของวารสารฯ เท่านั้น ไม่อนุญาติให้บุคคลหรือหน่วยงานใดคัดลอกเนื้อหาทั้งหมดหรือส่วนหนึ่งส่วนใดไปเผยแพร่เพื่อกระทำการใด ๆ ที่ไม่ถูกต้องตามหลักจริยธรรม
เอกสารอ้างอิง
Douglas A. Skoog and James J. Leary (1992).Principles of Instrumental Analysis,
Philadelphia: Saunders College Publishing.
Franksettle (1997), Handbook of Instrumental Technique for Analytical Chemistry, New Jersey: Prentice Hall Inc.
J. A. Brydson (1975),Plastic Materials,New York: Butterwoekth Publishers. Inc.
John Scheirs (2000), Compositional and Failure Analysis of Polymers, England: John Wiley and Sons Ltd.
R. V. MilbyI (1973), Plastics Technology,New York: McGraw-Hill, Inc.
Pravin L. Shah (1990), Handbook of Plastic Materials and Technology, New York: John
Wiley & Sons Inc.
Terry L. Richardson (1989), Industrial Plastics: Theory and Application, New York:
Delmar Publishers. Inc.
