Advanced 3D-Printing Technologies for Transformative Radio Frequency and Optical Devices

Alsoufi, M. S., & Elsayed, A. E. (2017). How surface roughness performance of printed parts manufactured by desktop FDM 3D printer with PLA+ is influenced by measuring direction. American Journal of Mechanical Engineering, 5(5), 211–222.

Busch, S. F., Weidenbach, M., Fey, M., Schäfer, F., Probst, T., & Koch, M. (2014). Optical properties of 3D printable plastics in the THz regime and their application for 3D printed THz optics. Journal of Infrared, Millimeter, and Terahertz Waves, 35, 993–997.

Fernandes, C. A., Lima, E. B., & Costa, J. R. (2014). Dielectric lens antennas. In Handbook of Antenna Technologies (pp. 1–54). Lisbon: University of Lisbon.

Furlan, W. D., et al. (2016). 3D printed diffractive terahertz lenses. Optics Letters, 41(8), 1748–1751.

Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014). Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. Analytical Chemistry, 86(7), 3240–3253.

Hernandez-Serrano, A. I., & Castro-Camus, E. (2017). Quasi-Wollastonprism for terahertz frequencies fabricated by 3D printing. Journal of Infrared, Millimeter, and Terahertz Waves, 38, 567–573.

Hong, B., Chudpooti, N., Akkaraekthalin, P., Somjit, N., Cunningham, J., & Robertson, I. (2018). Investigation of electromagnetic mode transition and filtering of an asymptotically single-mode hollow THz Bragg fibre. Journal of Physics D: Applied Physics, 51(30), 305101.

Hong, B., et al. (2018). Low-loss asymptotically single-mode THz Bragg fiber fabricated by digital light processing rapid prototyping. IEEE Transactions on Terahertz Science and Technology, 8(1), 90–99.

Kampker, A., Kreisköther, K., & Reinders, C. (2017). Material and parameter analysis of the PolyJet process for mold making using design of experiments. International Journal of Chemical, Molecular, Nuclear, Materials, and Metallurgical Engineering, 11(3), 242–249.

Kaur, A., Myers, J. C., Ghazali, M. I. M., Byford, J., & Chahal, P. (2015, May). Affordable terahertz components using 3D printing. Proceedings of the IEEE 65th Electronic Components and Technology Conference (ECTC),2071–2076.

Kechagias, J. D., & Maropoulos, S. (2015). An investigation of sloped surface roughness of direct Poly-Jet 3D printing. In Proceedings of the International Conference on Recent Advances in Mechanical, Mechatronics, Civil, Chemical, and Industrial Engineering (pp. 150–153).

Li, J., Nallappan, K., Guerboukha, H., & Skorobogatiy, M. (2017). 3D printed hollow core terahertz Bragg waveguides with defect layers for surface sensing applications. Optics Express, 25(4), 4126–4144.

Min, L. (2016). Novel materials, fabrication techniques and algorithms for microwave and THz components, systems and applications (Doctoral dissertation, University of Arizona).

Otter, W. J., & Lucyszyn, S. (2017). Hybrid 3-D-printing technology for tunable THz applications. Proceedings of the IEEE, 105(4), 756–767.

Pandey, S., Gupta, B., & Nahata, A. (2013). Terahertz plasmonic waveguides created via 3D printing. Optics Express, 21(21), 24422–24430.

Sachdeva, A., Singh, S., & Sharma, V. S. (2013). Investigating surface roughness of parts produced by SLS process. International Journal of Advanced Manufacturing Technology, 64, 1505–1516.

Schmid, M., Amado, A., & Wegener, K. (2015). Polymer powders for selective laser sintering (SLS). AIP Conference Proceedings, 1664, 160009.

Udroiu, R., & Mihail, L. A. (2009). Experimental determination of surface roughness of parts obtained by rapid prototyping. In Proceedings of the 8th WSEAS International Conference on Circuits, Systems, Electronics, Control & Signal Processing (pp. 283–286).

Puerto De La Cruz, Spain. Vorobyov, A., Farserotu, J. R., & Decotignie, J.-D. (2017). 3D printed antennas for Mm-wave sensing applications. Proceedings of the 11th International Symposium on Medical Information and Communication Technology (ISMICT), 23–26.

Wu, Z., Kinast, J., Gehm, M. E., & Xin, H. (2008). Rapid and inexpensive fabrication of terahertz electromagnetic bandgap structures. Optics Express, 16(21), 16442–16451.

Xin, H., & Liang, M. (2017). 3-D-printed microwave and THz devices using polymer jetting techniques. Proceedings of the IEEE, 105(4), 737–755.

Yi, H., Qu, S.-W., Ng, K.-B., Chan, C. H., & Bai, X. (2016). 3-D printed millimeter-wave and terahertz lenses with fixed and frequency scanned beam. IEEE Transactions on Antennas and Propagation, 64(2), 442–449.

Zhang, B., Chen, W., Wu, Y., Ding, K., & Li, R. (2017). Review of 3D printed millimeter-wave and terahertz passive devices. International Journal of Antennas and Propagation, 2017.